Specifications

automatic plastic electric kettle
1.Customzied Accepted
2,Fast Delivery
3.Double Water Windows
4. CE/RoHS

 

Specifications

Double Water Window Travel Electric Kettle 
1.Customzied Accepted 
2,Fast Delivery 
3.perfect QC system 
4.Double Water Window 

1

Capacity: 1.7L

Photo Gallery

 

 

 

 

 

 

How to use ?

Before using your kettle

If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling a full kettle of water twice and then discarding the water. Wipe the surface with a damp cloth.

 

Operation of your kettle

1. To fill the kettle, remove it from the power base and open lid by pulling up the lid, fill with the desired amount of water, and then close the lid. Alternatively, the kettle may be filled through the spout. The water level should not exceed max marks or sit below min level. Too little water will result in the kettle switching off before the water has boiled.

2. Position the kettle on the power base.

3. Connect the plug into a power outlet. Press down the switch, the indicator will light up. Then start to boil the water, the kettle will switch off automatically once the water has boiled.

4. Lift the kettle from the power base and then pour the water.

5. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power base when not in use.

 

Boil-dry protect

Should you accidentally let the kettle operate without water, the boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to cool before filling with cold water before re-boiling.

 

Cleaning and Maintenance

1. Never immerse the kettle, power cord or power base in water, or allow moisture to contact with these parts.

2. Wipe the appearance of body with a wild and damp cloth or cleaner, never use a poisonous cleaner.

3. Remember to clean the filter at intervals. The filter can be detached for easier cleaning. When disassembling, make the spout toward users, you can see a tuber on the wall of housing, press the tuber with a little force, and then lift the filter. To attach, make the tuber on the bottom of filter be supported by the flange of spout, then push the filter towards the spout direction, the tuber on the top of filter will lock the wall of housing.