Name: Down Pipe Machine/rain pipe making machine
Brand: ZHONGTUO
Availability: InStock

Product Details

Down Pipe Machine/rain pipe making machine

Product Description

Downspout pipe making machine:

Zhongtuo downspout pipe making machine could be used to make downspout pipes in a higher speed and good quality by 16 years in this area. For this machine, we take guide column frame style to make machine for making sure machine working speed and steady. And for the transmission, we will use gearbox with chain.

The machine will be totally same as the following pictures shows.

Customer drawing profile and finished product:

Width 150mm, height: 150Mm, thickness: 0.8mm.

Working process of the downspout roll forming machine:

Decoiler ----feeding ----roll forming----press of the mould ----shearing ----formed products

Main elements of the downspout roll forming machine:

Decoiler

1. Usage:passive feeding,manual tension bridle. It will be used for supporting the coil.
2. Capacity:3T

Leveling system:

Usage: when coil input, leveling system will level it to make it clean and straight as from coil, it will be a little curve. Curving will affect the pipe making accuracy.

Main roll forming system of downspout roll forming machine:

The machine was composed by the following elements: passive decoiler, one set of main forming machine, one set of hydraulic shearing station, one box of computer control station, one hydraulic oil box, two set of receiving area, one set of bending station.

Item name	Parameters
Power	5.5kw
No. of station rollers	24 rollers and horizontal roller and a series of vertical roll
Transmission	chain
Forming speed	8-10m/min
Supported material	0.4-0.8mm color steel sheet or GL, GI and others
Single sided coating	0.05mm
Hydraulic station power	5.5kw
Error	±2mm
Main machine size	8000 mm×1250 mm×1500 mm
Control style	the high voltage control
The maximum bending camber	90⁰
Function	combination of bending and lock function
Elbow Bending speed	5m/ min
Power of main motor power	2.2kw
Material of shearing	Cr12
PLC computer control	Panasonic

Downspout Pipe Bending Machine

Brief introduction:

For the straight downspout pipe and elbow pipe cannot be made by one machine. When you need to make the elbow, you need to use this pipe bending machine. The following are some information for your reference:

1. Control style:the high voltage control
1. Supported material: Colored steel panel with thickness of 0.8mm

Packaging & Shipping

Our Services

1. Installation and training:

a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.

b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other neces

sary things.

2. After Service

a.One year guarantee for whole machine.

b.24 hours technical support by email or calling

c.If there is any problem found of the machine, we will repair it for free in one year.