rechargeable Jump start , car emergency start , charge for tablet pc ,smartphone, laptopPC, LED
USD $56.4 - $57.5 /Set
Min.Order:100 Sets
Shenzhen Carku Technology Co., Ltd.
Automotive emergency start, car emergency start , charge for tablet pc ,smartphone, laptopPC, LED
lithium battery mini booster ,car emergency start , charge for tablet pc ,smartphone, laptopPC, LED
Car Emergency kit ,car emergency start , charge for tablet pc ,smartphone, laptopPC, LED
emergency tools for car, car emergency start , charge for tablet pc ,smartphone, laptopPC, LED
portable Multifunction jump start for 12V car, the smallest&lightest portable jump starter, and also can supply power for Mobile
Multifunction jump start for 12V car - EPower Elite ( Patent Product )
Product parameters:
Size: | 160*75*28mm |
Weight: | 420g |
Output: | 5V/2A; --- Mobile phone, Tablet PC, PSP, MP3/MP4… 12V/10A; --- Vehicle cooler. inflation pump... 19V/3.5A; --- Laptop PC Jump start;--- 12V vehicle including diesel LED light --- (light, burst flashing, SOS) |
Input: | 14V/1A |
Starting Current: | 200A |
Peak Current: | 400A |
Parts List:
# | Parts Name | Quantity |
1 | Main Product | 1 |
2 | Mobile phone switch cable | 1 |
3 | Notebook switch cable | 1 |
4 | Mobile phone connector | 8 |
5 | Notebook connector | 8 |
6 | Home Charger | 1 |
7 | Car charger | 1 |
8 | Jump cable battery clamps | 1 |
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty whenall LED lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V vehicle, please make sure at least three LED lights of EPOWERare bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.
Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4 Pocket PC PDA, notebook as well as other products charge / power supply;