Specifications

1.13000mAh,600A,Li-polymer,Jump starter 12V vehicle
2.Speciall used for rescuing
3.Size,weight 10 percent of lead-acid cell

 

Model No.	Item	Parmater (Carku)	Priority
Epower-standard	Product name	Jump starter	New line, beginning from last year
	Battery Material	Li-polymer	Long usful time around 3-5 years, enviromental protention
	Components and IC	Import from U.S.A.	High quality warranty
	Battery Capacity	13000mAh	Big capacity can jump start vehicle around 10-20 times and long standby time around 1 year
	Quality Grade	A	Quick charing time around 2-3 hours
	Input	12V/1A
	Output	12V	Wide usage scope
	Start Current	300A
	Peak Current	600A
	Operation Temperature	-20°C~60°C/0°F~140°F	It is okay to use in cold weather and high-temperature enviroment, no bombing happened.
	Weight	690g	Light weight, portable carrying
	Dimension(L*W*H)	18cm*7cm*3.5cm	Small size, portable carrying
	Cycle times	>500cycles	Many times
	Certificate	FCC,CE,ROHS	High quality meet with the required standard
	Patent	Patent of outlook design and utility model from SIPO	Patent devoid copy and protect sales market
	Usage Scope	Jump start 12V vechicles specially for Auto Repair Shop;Transportation company;  4S shop;Insurace company
	Advantage	Compared with other models, Large capacity and high peak current, specially for repaired shop

 

 

Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty whenall LED lights start to flash

5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.

6, Store the product in a cool and dry place and away direct sunlight.

Special note:
To start 12V vehicle, please make sure at least three LED lights of EPOWERare bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.

Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4 Pocket PC PDA as well as other products charge / power supply;