Name: aac cutting machine concrete blocks making machine/clay brick making machine for sale
Brand: Dongfang
Availability: InStock

Product Details

aac cutting machine concrete blocks making machine/clay brick making machine for sale

introduction of aac Cutting machine :

Cutting machine is the main equipment for Autoclave Aerated Concrete(AAC) productes, it`s necessary core equipments for capacity more than 50000m³/year, it is also necessary to increase the AAC capacity.

Cutting machine Features:

1. The machine structure is simple and practical, maintenance is easy;

2. The green cake is sideward, so the width of the whole green cake is 600mm, and the height is 1200mm. Steel wires for cutting is short, which is also difficult to rupture and float. It is high in cutting precision;

3. The vertical cutting device is fixed. Crosscut device cuts the green cake vertically by steel wires. It shortens the cutting steel wires length, guarantee precision of cutting;

4. This machine cuts the green cake in Hexahedron-type, so the products quality wont be influenced by the distortion of the mould;

5.Copies of model make to base body six cut , products quality does not out of shape to influence mould mould oil have;

6.A model can also produce the panel besides producing the building block;

7.Model cut course (upset , vertical cut , crosscut ) is it finish with the Engineer location to divide, every engineering location work simplification, operate and maintain it conveniently.

Basic Introduction of autoclaved aerated concrete:

Autoclaved Aerated Concrete (AAC) is a siliceous material (sand, fly ash and silicon tailings such as waste porcelain clay, stone processing waste materials, blast furnace slag, etc.) and calcareous materials (lime, cement) as the main raw material, mixing fat gas agent (aluminum powder), by ingredients, mixing, casting, pre-raising, cutting, autoclave, curing process made of light porous silicate products, because by the hair contains a lot of gas even after the small pores, hence the name of aerated concrete.

Production Process of Aerated Concrete:

According to the category and quality of raw material, and the features of equipment, the aerated concrete can be manufactured in different processes. Generally, add water to ash, silica sand or slag and crush them into slurry; then add powdery lime, cement of right amount, plaster, vesicant, foam stabilizer, and mix and pour it to mould frame; after curing, foaming and hardening, cut it into blocks and boards in different specifications; finally, transport it into pressure steamer with steam-curing cart, and get the light cellular concrete after steam-curing with high temperature and pressure.

Main Equipments in Autoclave Bricks Making Machine/brick making machines for sale :

Material-milling Equipments:

a. Crusher: Lime, gypsum, and such kind of bulk material need to be crushed as the first step in AAC Plant.

b. Miller: The AAC material must be fully grinded in order to make better reaction. Ball Mill is used widely, it has two types: dry and wet, can be chosen upon requirement.