High torque,2-phase Hybrid stepper motor driver in exporting and importing stepping motor driver company

High torque,2-phase Hybrid stepper motor driver in exporting and importing stepping motor driver company

USD $25 - $45 /Set

Min.Order:1 Set

Supply Ability:
5000 Set / Sets per Month
Port:
shanghai
Payment Terms:
T/T D/P D/A

Quick Details View All >

Place of Origin:
Jiangsu, China
Brand Name:
DEWO
Model Number:
DM556
Motor Type:
Other, Stepper motor driver

Changzhou Dewo International Trade Co., Ltd.

Business Type: Trading Company
Changzhou Jiangsu China
Main Products: Stepper Motor ,stepper motor driver ,breakout board ,cnc machine part ,power supply

Product Details

Applications

It can be applied in a variety of small scale automation equipment and instruments, such as labeling machine, cutting machine, packing machine, drawing machine, engraving machine, CNC machine and so on. It always performs well when it is used in equipment which requires for low-vibration, low-noise, high-precision and high-velocity.

Driver functions descriptions

Driver function

Operating instructions

Output

current

setting

Users can set the driver output current by SW1-SW3 three switches.

The setting of the specific output current, please refer to the instructions of the driver panel figure.

 

Microstep setting

Users can set the driver Microstep by the SW5-SW8 four switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure.

 

 

Automatic half

current function

Users can set the driver half flow function by SW4. "OFF" indicates the quiescent current is set to half of the dynamic current, that is to say, 0.5 seconds after the cessation of the pulse, current reduce to about half automatically. "ON" indicates the quiescent current and the dynamic current are the same. User can set SW4 to "OFF", in order to reduce motor and driver heating and improve reliability.

 

Signal interfaces

PUL+ and PUL- are the positive and negative side of control pulse signal; DIR+ and DIR- are the positive and negative side of direction signal; ENA+ and ENA- are the positive and negative side of enable signal.

 

Motor interfaces

A+ and A- are connected to a phase winding of motor; B+ and B- are connected to another phase winding of motor. If you need to backward, one of the phase windings can be reversed.

 

Power interfaces

It uses DC power supply. Recommended operating voltage is 24VDC-50VDC, and power consumption should be greater than 100W.

 

 

Indicator lights

There are two indicator lights. Power indicator is green. When the driver power on, the green light will always be lit. Fault indicator is red, when there is over-voltage or over-current fault, the red light will always be lit; after the driver fault is cleared, if re-power the red light will be off.

 

Installation

instructions

Driver dimensions:118×75×32mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation.

Signal interface details:

The internal interface circuits of the driver are isolated by the opt coupler signals, R in the figure is an external current limiting resistor. The connection is differential. And it has a good anti-jamming performance.

 High torque,2-phase Hybrid stepper motor driver in exporting and importing stepping motor driver company

common anode connection

 

Control signal and external interface:

 

Signal amplitudes

External current limiting resistor R

5V

Without R

12V

680Ω

24V

1.8KΩ

 

 

 

 

Common indicator

Phenomenon

Reason

Solution

 

 

 

The red indicator is on.

1. A short circuit of motor wires.

Inspect or change wires

2. The external voltage is over or low than the driver’s working voltage.

Adjust the voltage to a reasonable rang

3. Unknown reason

Return the goods

 

Outline and installation size (unit:mm)

 

 

High torque,2-phase Hybrid stepper motor driver in exporting and importing stepping motor driver company

Contact Supplier

Ms. Wendy wang Sales Chat Now
Telephone
86-0519-88996960
Mobile
18018256960
Address
No. 1,Room 915, Laodong Xi lu, ChangZhou,JiangSu Province,China Changzhou,Jiangsu

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Mechanical Parts & Fabrication Services > Motor Accessories > Motor Driver
Categories
Hi~