Low speed mini pm stepper motor stepping motor
USD $0.49 - $3.99 /Piece
Min.Order:1 Piece
Changzhou Dewo International Trade Co., Ltd.
General Specification for PM Stepping Motor :
Item | Specifications |
Step Angle Accuracy | ±8% (full step, no load) |
Resistance Accuracy | ±10% |
Inductance Accuracy | ±20% |
Temperature Rise | 80.C Max.(rated current,2 phase on) |
Ambient Temperature | -20.C~+50.C |
Insulation Resistance | 100MΩMin. ,500VDC |
Dielectric Strength | 500VAC for one minute |
Shaft Radial Play | 0.06Max. (450 g-load) |
Shaft Axial Play | 0.08Max. (450 g-load) |
SPECIFICATIONS:
Model | Step Angle (Deg.) | No. of Phase | Voltage (V) | Curren-t /Phase (A) | Resista-nce /Phase (ohms) | Holding Torque (g.cm) | Detent Torque (g.cm) | Rotor Inertia (g.cm^2) | Wire Diagram | |
PM3522-01A | 15 | 2 | 5 | 0.46 | 11 | 335 | 125 | 7.5 | A | |
PM3522-02A | 15 | 4 | 5 | 0.46 | 11 | 300 | B | |||
PM3522-01B | 7.5 | 4 | 5 | 0.862 | 5.8 | 550 | ||||
DW3522-02B | 7.5 | 2 | 5 | 0.5 | 10 | A | ||||
DW3522-03B | 7.5 | 2 | 12 | 0.2 | 608 | |||||
DW3516-01 | 7.5 | 4 | 12 | 0.255 | 47 | 300 | 65 | B | ||
DW3516-02 | 7.5 | 2 | 5 | 0.42 | 12 | 350 | 75 | A | ||
DW4222-01A | 7.5 | 4 | 12 | 0.8 | 15 | 800 | 210 | 9.6 | B | |
DW4222-02A | 7.5 | 2 | 4.2 | 0.6 | 7 | 800 | 210 | A | ||
DW4222-01B | 7.5 | 2 | 12 | 0.13 | 95 | 550 | 100 | 7.5 | ||
DW4222-02B | 7.5 | 4 | 5 | 0.81 | 6.2 | 600 | 110 | B | ||
DW4217-01 | 7.5 | 4 | 12 | 0.24 | 50 | 600 | 90 | 9.6 | ||
DW4217-02 | 7.5 | 2 | 5 | 0.59 | 8.6 | 500 | 100 | A | ||
DW4930-01 | 7.5 | 2 | 5 | 0.9 | 5.5 | 1700 | 350 | <14.5 | ||
DW5725-01 | 7.5 | 4 | 12 | 0.6 | 21 | 1500 | 425 | <12.5 | B | |
DW5725-02 | 7.5 | 2 | 5.6 | 0.625 | 9 | 1200 | A |