Product Details

lightweight concrete wall panel forming machine

We are professional manufacturer of different kinds of lightweight wall panel machines----precast hollow core wall panel machine, eps concrete sandwich wall panel machine, ceramsite block machine, fence wall panels made of construction waste etc. Our advantage is that we not only make the machines, but also make the panels, so we have rich experience.The most important part of our advantage is not only about the machine, but also about the formulation. How to make the best-quality panels at the lowest price according to the materials which the customers have in their countries is our main purpose. We can make the best formulation for our customers because we have rich experience in this field. The materials of making this kind of panels can be cement, fly ash, leca, perlite, eps, gypsum, Mgo, Mgcl2/Mgso4, wood saw powder, crushed plant straws, etc.

Product Description

Panel size: 2400x600x75/90/100/120/150/180mm or according to the customers' requirement.

Material: cement, fly ash, perlite or Mgo, Mgcl2 or according to what the customers have in their country.

Machine Details

Features of precast hollow core wall panel machine:

This kind of machine is made on the basis of our five-year production of panels. It is not only easy to use, high efficiency, high quality, but also low-cost.

1. High capacity

This new-style stainless steel machine can make 14 pieces of panels.

2. Lower the cost of production

2.1 We use stainless steel for the mould instead of traditional steel. Steel mould machines need brushing de-molding agent or the panels can't be taken out. Stainless steel machines don't need de-molding agent, this can save both labor and material cost for manufacturers. It can save around 0.1 USD per square meter.

3. The product quality is better.

Panels made by this kind of machine have better quality than other kinds. The panel will not be deformed. Its surface is smoother than others.

4. Specific design for the grooves. It can solve the problems during installation.

5. The male and female groove can be made at one time. It is very easy to use.

6. Specific design for the side mould.

The side mould is fixed onto the machine on one side, but it doesn’t influence the hydraulic mould opening and closing.

6. The machine can be fixed or movable according to the buyer’s requirement.

Our Services

We assign technicians for the installation of the machine. We prepare enough quick-wear spare parts for the customer. We will help train technicians until the buyer can run the line by themselves. We will also give our customers the best formulation to ensure make the best-quality panels at the lowest cost. If there is anything wrong with the machine because of the machine quality, our technician will go to repair it without any charge.

FAQ

A. How long is the curing time?

If you use normal portland cement, the curing time is around 5 hours. If you use Mgo, the curing time is only 2 hours.

B: How many labors are needed for the production line?

Normally 3 workers are enough for this line. That also depends on the production speed. 3 labors are working in group.

Advantages:

Ø Lightweight and high-strength

Ø Hanging strong

Ø Fireproof,soundproofing,waterproof

Ø Smooth surface of the product

Ø Easy to install

Ø Increasing the use of space

Ø Ease of construction and installation

performance index

Item	Property index	Test Result	Monomial conclusion
Surface density	≤ 90kg/ sq.m.	37kg/ sq .m	qualified
Flexual-resistance load	≥ 1.5	≥1.9	qualified
Impact performance	To bear 30kg standard sandbag ,the fall is 0.5m,the swing attact is 5 time	Attact 10 times is no flaw 12time	qualified
Single point hanging strength	To bear1000N handing action	The face don't have disrepair and flaw	qualified
Dry shrinkage	≤ 0.6mm/m	0.45mm/m	qualified
Noise insulation factor	≥ 35bB	40dB	qualified