Specifications

copper rod input diameter:8mm,
output diameter: 1.78mm-3.30mm
annealing: continuous annealing
Brand Name: WDS

Specifications

LT9-450Copper Large Pull with continuous annealing production line

copper rod breakdown machine;rod breakdown machine;8mm copper rod dawing machine

From 8mm to 1.78mm—3.30mm

copper rod input diameter:8mm,

output diameter: 1.78mm—3.30mm
production speed:480meters/s
production capacity: 1200KG/hour

 

copper rod breakdown  wire drawing machine (450/LT9) 

number of dies:9

installed capacity:125KVA (Main motor:AC.110KW,spooler motor:15KW)

drive: frequency inverters

Dimension length 3000 * 1800mm Weight 6.5T width  

 

This company produces LT9-450 continuous annealing line used with pull-plus double-disc received Continuous Annealing Line (or, as the nose unloading line) production model, the formation of the entire production line continuous operation, drawing machine from a copper rod into the line of direct pull 8.00mm Model copper wire.
Annealing mode DC-annealing, annealing the use of advanced low-voltage power supply high current power supply, the control system adopts microcomputer intelligent control, equipment operation more stable, the maximum speed of 8 m / sec.

 

 LT-1200 large Pull continuous annealing line supporting equipment as follows:
Actinomyces gantry frame wear die rolling machine 110KW motor control cabinet tip LT-9 mold copper big pull
LT-1200 annealing machine LT-1200 cabinet annealing operation of the main electrical cabinet automatic double-disc MD-up Machine XB-600 like the nose and unloading-ray machine (also purchased) can store 1 tonne of copper wire used in the production line when a large single-core BV capacity pay-off.

LT-15DieHigh-speed copper drawing machine Main technical parameters:

Inlet wire diameter 3.00mm Outlet diameter 0.5mm—2.90mm Drawing number 15 Power 30KW Maximum speed 600m/min Fixed speed wheel diameter 350 mm Hourly output 1000kg/h

 

MDAutomatic Double Disc revenue Machine The company's MD series full-automatic double disc closed-ray machine is mainly used for wire and cable industry revenue line, with PLC intelligent control, change set, the entire production line non-stop without deceleration, annealing non-silk, according to settings Cu wire length of the auto-changer and economic benefits are particularly notable. Main technical parameters:

Take-plate range PND400 PND500 PND 630(Custom) Slide the top tour 220mm Take-up speed Torque Motor8m/s Inverter Motor 20m/s Power Torque Motor40NM*2 Inverter Motor5.5KW Equipment size Long2000*Weight1650mm

LT-1200Annealing machine and electric control system Main technical parameters: Diameter range of annealing 1.78—3.30mm Maximum speed 480m/min 2.5Hours Annealing method Low-voltage high-current short-circuit annealing Copper contact roller material Brass inlaid with pure cold-rolled nickel Annealing Wheel Material BeCu Wire Elongation at Break ≥30% Cooling water temperature ≤60°C Cooling water temperature ≤60°C Dimensions Long1500*High2000Weight150(mm) Weight1.5T