Mini Flat Glass Tempering Furnace LDGN3010
Negotiable /Set
Min.Order:1 Set
Haining Lidu Glass Machine Co., Ltd.
Mini flat glass tempering furnaces/ LDGN3010
LIDU Glass Machine Co.,Ltd
Tel: 0086 571 86923922
Fax: 0086 571 86922850
Address: Qier Road,Lianhang Economic Development Zone,Haining City,Zhejiang Province,China;
It can process glass of diameter 40 mm and thickness 2.5mm with good flatness after tempering .It also can process intensified glass with thickness 1.8mm.
Characteristics
1.The furnace can temper 2.85mm glass.
2.It can temper glass with 2.85mm---19mm in thickness, 1600mm in width.
3.The blower is controlled with inverter completely, so that it can reduce power consumption.
Mainly in
This machine is specially used for producing high-quality super thin ,super small or super big flat tempered industrial instruments, home appliance, lamps and lantern decorations, architecture decorations ,and also tempered and laminated glass.
Parameters
Type | Max.Glass Size(mm) | Min.Glass Size(mm) | Glass Thickness(mm) | Capacity (m /h) | Installation Power(kw) |
LDGN1302 | 1300×200 | 40×400 | 2.85-12 | 5.2 | 60 |
LDGN2003 | 2000×300 | 50×50 | 2.85-12 | 11.7 | 100 |
LDGN2006 | 2000×600 | 100×50 | 2.85-12 | 23.6 | 260 |
LDGN2010 | 2000×900 | 140×50 | 2.85-12 | 35.1 | 350 |
LDGN3010 | 3200×900 | 140×50 | 2.85-12 | 56.1 | 420 |
Remark
All sizes are based on millimeter and the capacity subjected to 5mm glass at 80% utilization and 100% end-product rate. The change of equipment configuration will be in accordance with the different of glass thickness range,it is depended on actual design.