Name: LINKJOIN LZ-820 fluxmeter flux meter manufacture magnetic flux tester with CE Certification
Brand: LINKJOIN
Availability: InStock

Product Details

LINKJOIN LZ-820 fluxmeter flux meter manufacture magnetic flux tester with CE Certification

Main Features:

♦ Flux meter LZ-820B is used for measuring the Flux Density of various permanent magnet and the Peak Value in pulsed magnet field;
♦ Preset sorting & Peak-hold & Alarm-alert functions;
♦ Interface for remote control, suitable for automatic production lines;

♦ Customized coil fixtures.

Product Pictures

Coil Fixtures (optional):

♦ Flux B coil;

♦ Standard magnetic coil;

♦ Helmholtz coil.

Technical Parameters

Measurement

Input Signal: 1
Input mode: Two-cores interfaces
Input Resistance: 100 k or 10 k
Max. inout voltage: 60 V
Display update rate: 3/s

Display Resolution: 4¾ digits

Integrator Cpacitance: 1 µF

Input Ressistance	100 k	10 k	10 k	10 k
Range	400mVs	40mVs	4 mVs	0.4mVs
Resolution	0.1 mVs	0.01 mVs	0.001 mVs	0.0001 mVs

Accuracy: Offset: ±10 µVs ±DC Integrator Drift

Gain:±0.25% of reading(max. rate of change<10Vs/s)

Minimum dφ/dt: 20 µVs/minute

Maximum dφ/dt: 60Vs/s

Integrator Drift: ±1µVs/minute,

DC Peak

Display Resolution: 4¾ digits

Integrator Cpacitance: 1 µF

Input Resistance	100 k	10 k	10 k	10 k
Range	400mVs	40mVs	4 mVs	0.4mVs
Resolution	0.1 mVs	0.01 mVs	0.001 mVs	0.0001 mVs

Accuracy: Offset: ±100 µVs ±DC Integrator Drift

Gain:±5% of reading(max. rate of change<10Vs/s)

Maximum dφ/dt: 60Vs/s

Front Panel

Display: LCD with backlight

Display Resolution: 4¾ digits

Display Update Rate: 3/s

Display Units:Vs, WbN, Wb , Gs , T , Oe , A/m ,Wb.cm

Units Multipliers: µ, m, k, M

Kaypad: 16key with multi-function
Alarms:

Number: 3
Settings:High and Low set point , inside/outside, beeper on/off
Output:Beeper, Relays for High, Neutral, Low

Relays

Number of Relays: 3
Contacts: Normally Open(NO), Normally Closed(NC)
Contact Rating:30 VDC at 2 A
Operation:Follows High and Low alarms. Can be operated manually.
Monitor Output
Scale: ±5V
Accuracy: ±1% of reading ±10 mV
Minimum Load Resistance: 1 kΩ
Connector:DB25cores plug

General

Ambient Temperature: -15 ~ 55°C .
Power Requirement: 100, 120, 220, 240 VAC, +5% -10%, 50 or 60 Hz, 20 watts
Dimension:Width240mm X Length345mm X Height106mm
Weight:4 KGs

Company Information

Our services

HUNAN LINKJOIN TECHNOLOGY CO., LTD. warrants each instrument of its manufacture to be free from defects in material and workmanship. Our obligation under this warranty is limited to servicing or adjusting any instrument returned to our factory for that purpose. The warranty period is 18 months. On returning the equipment under warranty, the buyer bears the costs for the shipment to LINKJOIN; LINKJOIN bears the costs for returning the device to the buyer. However, the buyer bears all the costs for shipment, taxes and duties, if the device is returned to LINKJOIN from abroad.

The warranty period begins on the date of delivery of the product or later on the date of installation of the product if the product is installed by LINKJOIN, the warranty period begins on the 31st day after delivery, provided that if you schedule or delay the LINKJOIN installation for more than 30 days after delivery.

LINKJOIN warrants the product only if it has been sold by an authorized LINKJOIN employee, sales representative, dealer or LINKJOIN headquarter.

The warranty period does not apply to defects of product result from improper or inadequate maintenance, repair or calibration;unauthorized modification or misuse; improper site preparation or maintenance. Caution: the hall probe is easy to damage; it's not in the warranty scope list.

Exhibition Shows

Advantages

1. 100% Manufacture

Both our factory and company are founded in Loudi, Hunan Province. We are specialized in manufacture and

sales of magnetic measurement instruments. All the products are made by our own factory. So our price is

competitive.

2. Quality control

From the material to the final product. All the components together with production procedure are inspected

and controlled. We ensure the products have been fully inspected by our QC one by one before shipment.

3. Reliable after sales service

Free training for the operation of equipment in our company, which is provided by our professional training

department.

We provide 18months warranty for the maintenance without charges for components change or repairing.

(except for fragile parts) . And we are responsible for lifelong repair, and charge appropriately for repair

service out of warranty period.

FAQ

Q1: What are the terms of payments?

A1: We accept T/T, Western Union, Paypal, and cash.

Q2: How long it will take to delivery the goods?

A2: If we have the goods in stock, we will delivery them within3 working days after we get your payment. If we

do not have in stock, we will delivery them before the deadline which we both parties agreed on.

Q3: What kind of package you offer?

A3: We pack the goods by the export box,fill with foam to make sure the goods in good condition for storage

and shipment.

Q4: What kind of shipment ways are available?

A4: By sea to your nearest port.

By air to your nearest airport.

By express(DHL, UPS, FedEx, TNT, EMS) to your door.

If customers have their own express account number, transportation fee paid by such accounts are also

welcome.We will provide you a tracking No. after we ship the goods, so that you can track the goods

conveniently.