sheet metal stamping dies

Stamping Die:
Progressive/Plain dies for metal stamping parts such as small auto parts
---Auto parts.
---Computer cases,
---Cover or accessories of duplicater
---Crinter, auto sound
---VCD, DVD, MP3, MP4,
---Other electronic appliance and membrane switch cutting dies.
Plain die, Cutting die, Forming die, Bending die, Gang dies, Riveting die, Pierce die, Shearing Die.
Precision of the Wire Cutting up to 0.003mm. Press capabilities up to 350 tons.
Ability marking HP punch die from 30-1200 times per minute.

 

LMC has designed and built dozens of dies for parts with a wide range of material thicknesses and coil widths. We also design to fit your presses. We can also design to do curling and hemming. We can provide progressive dies to handle material thicknesses from as thick as 5.0mm (.200") high strength steel to as thin as 0.25mm (.010") thick aluminum and stainless steel. Let us put our engineering and equipment to work for you.

 

	Forming Dies Form Dies are probably the most common metal stamping dies used in the industry. Form dies can be very simple to moderately complex. Form Dies are normally less expensive to manufacture than progressive metal stamping dies, Compound metal stamping dies, and Deep Draw metal stamping dies.
	Deep Draw Die A Deep Draw Die is suitable for metal stamping parts when the material is required to flow or stretch, as opposed to being bent or formed. It is common for deep draw dies to require multiple steps in order to achieve a significant depth.
	Compound Die Compound Dies are applicable in many metal stamping operations. When metal stamping part requires more than one feature to be stamped and these operations can be run independently of one another, a compound die can be used. Compound dies will provide multiple metal stamping features with each stroke of the press. Furthermore, compound dies provide excellent part flatness.
	Progressive Metal Stamping Die Progressive dies are used more for higher volume parts needing to run automatically at high rates of speed (strokes per minute). Normally the parts tend to be smaller, but there are also larger part applications as well.