Main Features of 25HP farm tractor

1. The use of a simple floor structure and an external divider is easy for maintenance;
2. The safety frame is optional;
3. The single-acting or double-acting clutch is optional;
4. The various gear configurations, such as 8+2, 8+8, and 16+4 are optional, and the velocity distribution is reasonable to

meet different operating needs;
5. The synchronized shuttle shift is optional, and the operation is easy, flexible and reliable;
6. The operations of hydraulic steering, the mandrel cylinder front drive axle are easy and flexible.
7. The front and rear narrow treads, stepless and adjustable rear tread and the minimum tread of 960mm can better meet

the operational requirements.

Technical parameters of 25HP farm tractor

Drive type	4*4
Overall dimension(L * W * H)	322512401900
Wheelbase (mm)	1639
Track(front/rear)	1215/960-1460
Track(front/rear) regulating method	Fixed/stepless
Min.Ground clearance(mm)	270
Min.operating weight (kg)	1400
Counterweight (max)(front/rear)	80/124
Gears(forward/reverse/creeper)	8+2/8+8
Theoretical speed of each gear(forward/reverse)	1.72-26.02/2.25-10.39;1.72-26.02/1.61-24.24;
Engine
Brand	Laidong
Engine type	In-line , water cooled, four-stroke
Intake mode	Natural intake
Number of cylinders	3
Bore	85
Stroke	90
Displacement(L)	1.53
Engine rated power kW@rpm	18.8
Rated speed	2350
Air cleaner type	Dry or wet type
Type of cooling system	Water-cooled
Max. Torque@ revolving speed (rpm)	≥88/1650±100
Specific fuel consumption at rated conditions (g/kW.h)	≤278
Fuel tank capacity (L)	17
Steering brake system
Type of steering system	Hydraulic
Type of steering gear	Cycloid orbitrol steering gear
Type of braking system	Shoe type
Transmission system
Clutch type	Double action
Gearbox type	Two-axis mechanical gearbox
Gearbox shift mode	Shift sleeve +sliding gear
Type of central transmission	Spiral bevel gear type
Final transmission mode (front/rear)	Built-in type, single-stage spur gear
Walking system
Frame type	Frameless
Working device
Type of hydraulic suspension system	Open-center, separated type
Type of linkage	Three point rear linkage
Linkage classes	Class 0 or class I
Lift capacity(610mm point))(kN)	4.2
Regulating mode	Positioning control and floating control
Type of PTO shaft	Non-independent type
The number of PTO shaft splines	6 splines/8splines
Outer diameter of PTO shaft spline	φ35/φ38
PTO shaft speed	540/760 or 540/1000
Hydraulic system
Hydraulic output flow (L/min)	26