Specifications

PU Furniture Putty
1. Excellent fillness , dry fast, easy to rub, low flavor
2. ISO9001, CCCEL, China 3C certificatiot

VIT PU series paint application process and main features:

Process 1:  cleaning base material – PU seal primer paint – bottom shading – PU/PE transparent primer paint ( 2 or 3 times) – color match – PU transparent finish paint

Process 2: clean base material – PU seal primer paint – PU/PE solid primer ( 2 or 3 times) – PU solid finish paint

VIT PU transparent putty paint series Model no.:8700
Product features	good fillness fast dry easy to rub low flavor
Application	Furniture, and all kinds of wooden decoration
Application method	Spray: the caliber of the spray gun is 1.5-2.0mm Pressure: 3 bars
Technical parameter	Ratio:8762 series paint: hard agent=4:1 Viscosity: ≥ 13 seconds Once mixed: the paint must be used within 3 hours Hard dry at least 1 hours
Packing details:	20kg
Construction samples	Material : oak ,maple,veneer etc .  Sanding with 180# sanding paper   PU transparent putty paint 8700 series   Coating weight each time 50g /sqm  Sanding with 320# sanding paper  PU transparent primer paint 8780 series Coating weight each time 150g /sqm Sanding with 320# sanding paper Repaint one coat , interval 2-3 hrs . Hard dry at least 4 hrs , suggest keep it overnight . Sanding with 320# sanding paper first ,and the 600# later . Color-match ( tinting )  Sanding with 600# sanding paper  PU /NCTransparent finish paint  Coating weight each time120g /sqm Hard dry at least 4 hrs , suggest keep it overnight .

Note:

1.      Stir the paint thoroughly before use.

2.      Pour the paint and hardener together, following the proportion stipulated on the label strictly, mix thoroughly and then filter the mixture with 200# filter screen. To avoid bubbling, let the mixture stand for 15 minutes before use.

3.      To achieve a better coating performance, seal the base wood with Carpoly sealer.

4.      The added thinner will vary from application conditions.

5.      Seal the paint can tightly if it is not used up at one time.

6.      Method: Brush, roller, conventional spray and airless spry.

Thinning:

1.      We strongly recommend you to use VIT matched thinner to achieve the ideal coating performance. Adjust the thinning ratio according to needs.

2.      No dilution before the paint and hardener are thoroughly mixed.

3.      Mix thoroughly before use.

Notes for use

1.      Thick painting is not suggested to avoid pin holes and bubbling of the paint film.

2.      Try to use our matched products and do not add other chemical elements in the paint.

3.      Do not apply when the temperature is below 5°C and RH is 85% or above.

4.      If moisture content of the wood exceeds 12%, dry it first.

5.      The paint film is easy to crack and peel off if the wood putty is not completely dry or thoroughly sanded.

6.      Each layer must be dry enough and sanded thoroughly before the application of next step or it will cause blushing or peeling off of the paint film.

7.      The work area and application tools should be maintained clean to avoid bad coating performance.

8.      Select paint according to the wood and arts and crafts.

Caution:

1.      Extremely inflammable liquid, keep away from sources of ignitions. Store in a cool, dry and well-ventilated place.

2.      Avoid contact with eyes, skin and clothing. In that case, immediately flush eyes or skin with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists.

3.      For professionals use only. Keep it out of reach of children and away from food, beverages etc.

Warm tips:

1.      In order to better guarantee the lawful right and interest of the consumers, it is not recommended to purchase products without full label identification. Beware of counterfeit.

2.      The product is only to professionals, the details of product information refer to Uses manual.