Specifications

outdoor fireproof paint
1. great flame retardancy,
2. excellent adhesion, abrasion resistance
3.tough film

 industrial use fireproof  paint

VIT fireproof paint/coating series Model no.:SW0-3851
Product features	GREAT FLAME RETARDANCY EXCELLENT ADHESION HIGH WEAR RESISTANCE TOUH FILM
Application	can provide fireproofint protection to steel structures in industrial and civil buildings.
Application method	roll and brush
Technical   parameter	Suggest used it directly when you open the packing.
Packing details:	18L
Construction samples	Substratement cleaning Sanding with 320# sanding paper Water-base metal anti-rust primer SWS-5301 Coating weight 8-10m²/L/ one coat Hard dry> 24 hrs Saiding with 320# danding paper Ultrathin steel structure fireproof paint SWO-3851 Coating weight 8-10m²/L/ one coat Repaint one coat, interval >

 

Self life : Minimum 12 months at 77F (25°c)-- Unopened and store in dry and cool place. 

 

Remarks: It does need to use seal primer paint if apply to wooden material.  Use VIT SWS-5301 as sealing primer paint if apply to metal project. 

 

Note:

1.      Stir the paint thoroughly before use.

2.      Pour the paint and hardener together, following the proportion stipulated on the label strictly, mix thoroughly and then filter the mixture with 200# filter screen. To avoid bubbling, let the mixture stand for 15 minutes before use.

3.      To achieve a better coating performance, seal the base wood with VIT sealer.

4.      The added thinner will vary from application conditions.

5.      Seal the paint can tightly if it is not used up at one time.

6.      Method: Brush, roller, conventional spray and airless spry.

Thinning:

1.      We strongly recommend you to use VIT matched thinner to achieve the ideal coating performance. Adjust the thinning ratio according to needs.

2.      No dilution before the paint and hardener are thoroughly mixed.

3.      Mix thoroughly before use.

Notes for use

1.      Thick painting is not suggested to avoid pin holes and bubbling of the paint film.

2.      Try to use our matched products and do not add other chemical elements in the paint.

3.      Do not apply when the temperature is below 5°C and RH is 85% or above.

4.      If moisture content of the wood exceeds 12%, dry it first.

5.      The paint film is easy to crack and peel off if the wood putty is not completely dry or thoroughly sanded.

6.      Each layer must be dry enough and sanded thoroughly before the application of next step or it will cause blushing or peeling off of the paint film.

7.      The work area and application tools should be maintained clean to avoid bad coating performance.

8.      Select paint according to the wood and arts and crafts.

Caution:

1.      Extremely inflammable liquid, keep away from sources of ignitions. Store in a cool, dry and well-ventilated place.

2.      Avoid contact with eyes, skin and clothing. In that case, immediately flush eyes or skin with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists.

3.      For professionals use only. Keep it out of reach of children and away from food, beverages etc.

Warm tips:

1.      In order to better guarantee the lawful right and interest of the consumers, it is not recommended to purchase products without full label identification. Beware of counterfeit.

2.      The product is only to professionals, the details of product information refer to Uses manual.