Specifications

VIT Fluorocarbon metalic coating gives durability, UV- resistance, pollution-resistance, the metal sence of realt is good.

VIT fluorocarbon paint/coating series

 

 

VIT fluorocarbon  paint/coating series Model no.:WGS-6351
Product features	Durability UV-resistance Poluution-resistance the metal sence of realty is good 30-year-long theoretic service life
Application	Suitable for buildings, bridges and steel structures substrate decoration.
Application method	spray
Technical parameter	Ratio: Main paint: curing agent :diluent=100:10:25-35 Surface dry equal or more than 30 mins
Packing details:	5/18L
Construction samples	VIT putty powder SWZ-0001 Hard dry >24 hrs Sanding with 320# sanding paper VIT fluorocarbon coating sealer WGS-6331 Coating weight 8-10m²/L/one coat VIT metal fluorocarbon WGS-6321 Coating weight 8-10m²/L/one coat

 

Self life : Minimum 12 months at 77F (25°c)-- Unopened and store in dry and cool place. Keep it in a cool and dry place above 0°c, and frost should be strictly avoided.

 

 

Note:

1.      Stir the paint thoroughly before use.

2.      Pour the paint and hardener together, following the proportion stipulated on the label strictly, mix thoroughly and then filter the mixture with 200# filter screen. To avoid bubbling, let the mixture stand for 15 minutes before use.

3.      To achieve a better coating performance, seal the base wood with VIT sealer.

4.      The added thinner will vary from application conditions.

5.      Seal the paint can tightly if it is not used up at one time.

6.      Method: Brush, roller, conventional spray and airless spry.

Thinning:

1.      We strongly recommend you to use VIT matched thinner to achieve the ideal coating performance. Adjust the thinning ratio according to needs.

2.      No dilution before the paint and hardener are thoroughly mixed.

3.      Mix thoroughly before use.

Notes for use

1.      Thick painting is not suggested to avoid pin holes and bubbling of the paint film.

2.      Try to use our matched products and do not add other chemical elements in the paint.

3.      Do not apply when the temperature is below 5°C and RH is 85% or above.

4.      If moisture content of the wood exceeds 12%, dry it first.

5.      The paint film is easy to crack and peel off if the wood putty is not completely dry or thoroughly sanded.

6.      Each layer must be dry enough and sanded thoroughly before the application of next step or it will cause blushing or peeling off of the paint film.

7.      The work area and application tools should be maintained clean to avoid bad coating performance.

8.      Select paint according to the wood and arts and crafts.

Caution:

1.      Extremely inflammable liquid, keep away from sources of ignitions. Store in a cool, dry and well-ventilated place.

2.      Avoid contact with eyes, skin and clothing. In that case, immediately flush eyes or skin with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists.

3.      For professionals use only. Keep it out of reach of children and away from food, beverages etc.

Warm tips:

1.      In order to better guarantee the lawful right and interest of the consumers, it is not recommended to purchase products without full label identification. Beware of counterfeit.

2.      The product is only to professionals, the details of product information refer to Uses manual.