184 series brushless AC synchronous alternator

RGI Series brushless three phase AC Alternator according to international advanced alternator producing technology design and develop new generation brushless AC synchronous alternator.

This series are suitable with most international standard. Such as GB755,EN60034,BS5000,VDE0530,NEMA MG1-32,IEC34 ect…

Machinery Character:

Steel made seat, iron casting cover, top silicon steel sheet, import ball bearing.

Install type: Single bearing installation with SAE connection and driving sheet.

Double bearing with standard shaft extension and flange connection cover.

Electrical Character:

Alternator adopt brushless excitation

Insulation: H ,Protection level:IP21 or IP23

State voltage adjusting rate≤±1% Transient adjusting rate+20%,-15%(60%In,COS≤0.4lag)

Null loading voltage wave distortion rate ≤5% Voltage adjusting range≥±10% UN

Environmental condition of applying, temperature≤40℃ height above sea level ≤1000m

Super function, reliable quality, convenient maintain, Alternator can be connected with prime mover in hard or flexible.

Using for small power station, factory, building, work side and so on as light up and motor power.

  1.Covered with plastic film to prevent moisture.
  2. Packed in standard export package with Plywood cases.

Warranty period:

Within 24 months from alternator's delivery or 18 months after the date first used, whichever comes first.

Accordant Standard:

GB755 National Standard for Rotating Electrical Machine;

IEC60034 (International Electrotechnical Commission);

BS5000, VDE0530, CSAC22.2-100 International Standard.

Application Area:

Kwise alternators fit all different brands of engines, are extensively used as prime or standby power in various applications.

Such as General industry, Mining, Military, Oilfield, Construction, Telecommunication, Hospital, Engineering Machinery,Building construction, CHP, Marine and other harsh environment applications etc.

1.Q: Classification of generator:

(1)Single phase or three phase is optional.

(2).Single bearing or double bearing is optional.

(3).PMG is optional

(4).Droop Kit and Anti-condensation heater are optional according to the operation environment.

(5).2 pole/4 pole/6 pole/8 pole alternators are optional.

2.Q:How to select generator?

(1).Working environment(less than 1000m above sea level & less then 40℃ ambient temperature).

(2).Different country with different rated frequency(50Hz or 60Hz).

(3). For sea side operating environment,anti-condensation heater and droop CT.

(4). Generator insulation class H.(Inccopper wire,rotor,stator,)

(5). Generator stators are wound to 2/3 pitch. The 2/3 pitch design avoids excessive neutral currents sometimes seen with higher winding pitches,when in parallel with the mains.

3.Q:What is your MOQ of this item?

   A: Above 1pcs

4.Q: What is the lead time?

    A: 15-20 days after receiving your L/C or T/T deposit.

5. Q: Is it all right to make customer's own brand name?

     A: We can be your OEM manufacture with your authorization of brand.

6. Q: Where is your Loading Port?

    A: Fuzhou Port, China.Which is only 40km far away from our factory location.

7. Q: What are your payment terms?

     A: 30% deposit and balance T/T against B/L copy or L/C at sight.

1.Q: Classification of generator:

(1)Single phase or three phase is optional.

(2).Single bearing or double bearing is optional.

(3).PMG is optional

(4).Droop Kit and Anti-condensation heater are optional according to the operation environment.

(5).2 pole/4 pole/6 pole/8 pole alternators are optional.

2.Q:How to select generator?

(1).Working environment(less than 1000m above sea level & less then 40℃ ambient temperature).

(2).Different country with different rated frequency(50Hz or 60Hz).

(3). For sea side operating environment,anti-condensation heater and droop CT.

(4). Generator insulation class H.(Inccopper wire,rotor,stator,)

(5). Generator stators are wound to 2/3 pitch. The 2/3 pitch design avoids excessive neutral currents sometimes seen with higher winding pitches,when in parallel with the mains.

3.Q:What is your MOQ of this item?

   A: Above 1pcs

4.Q: What is the lead time?

    A: 15-20 days after receiving your L/C or T/T deposit.

5. Q: Is it all right to make customer's own brand name?

     A: We can be your OEM manufacture with your authorization of brand.

6. Q: Where is your Loading Port?

    A: Fuzhou Port, China.Which is only 40km far away from our factory location.

7. Q: What are your payment terms?

     A: 30% deposit and balance T/T against B/L copy or L/C at sight.