Product Details

WL series PTFE lip-rotary shaft seal

Good for all-plastic pumps where no metal contact with fluid media is allowed. This seal provides similar performance to lip seal, but is more economical in smaller quantities. Becase the seal has a soft surface on the OD, the seal will not damage the housing and can easily be installed and removed. The seal is used in lubricated and non-lubricated environments. It can used at shaft speeds to 25m/s in lubricated media and pressures to 0.5Mpa. Maximum PV 3.0 lubricated, 2.0 non-lubricated. Typical applications are gear boxes and environmental seals

Part code	Shaft diameter (mm)	Outer diameter (mm)	Width (mm)	Part code	Shaft diameter (mm)	Outer diameter (mm)	Width (mm)
WL00601607	6	16	7	WL05508010	55	80	10
WL00702207	7	22	7	WL06008510	60	85	10
WL00802207	8	22	7
WL00802407	8	24	7
WL00902207	9	22	7
WL01002508	10	25	8
WL01202408	12	24	8
WL01202508	12	25	8
WL01203008	12	30	8
WL01503008	15	30	8
WL01603008	16	30	8
WL01803508	16	35	8
WL02003508	20	35	8
WL02203508	22	35	8
WL02203608	22	36	8
WL02204008	22	40	8
WL02504008	25	40	8
WL02504010	25	40	10
WL02505210	25	52	10
WL02804710	28	47	10
WL02805210	28	52	10
WL03004710	30	47	10
WL03005010	30	50	10
WL03005210	30	52	10
WL03204710	32	47	10
WL03205210	32	52	10
WL03505010	35	50	10
WL03505210	35	52	10
WL03505510	35	55	10
WL03605010	36	50	10
WL03805510	38	55	10
WL03805810	38	58	10
WL03806210	38	62	10
WL04005510	40	55	10
WL04006210	40	62	10
WL04206210	42	62	10
WL04506510	45	65	10
WL05007010	50	70	10
WL05007210	50	72	10