Squre duct locking machine
Squre duct locking machine is of the cold roll forming machine
We desgined as the customer needed
Width of the material | ≤100mm | Diameter of Roller shaft | Φ40mm |
Thickness of the sheet | 0.6-0.8 mm | Raw material of roller | Gcr15,HRC55-62° |
Length of the final piece | 1000-3000mm | Transfer motor Power | 3KW,invert -Motor |
Speed of feeding | 0-5m/min | Control system | PLC controlling |
Power of main machine | 7KW | Dimension of the machine | 11*1.5*1.2m |
Voltage of the machine | 380V/50HZ/3ph | Direction of feeding | Left to Right |
Q’ty forming roller | 26sets | Air pressure | 0.6-0.8MPA |
cold roll forming machine .