china suppliers aisi 1045 alloy steel bar, carbon steel price per kg
USD $325 - $656 /Ton
Min.Order:1 Ton
Dongguan City Yaoteng Special Steel Co., Ltd.
china suppliers aisi 1045 alloy steel bar, carbon steel price per Kg
1045 steel stockholders and suppliers, delivering to the whole of the YAOTENG. 1045 is an unalloyed medium carbon steel grade with reasonable tensile strength. It is normally supplied in the cold drawn or as rolled condition. Tensile properties can vary but are usually between 500-800 N/mm². 1045 is widely used for applications which require better properties than mild steel but does not justify the costs of an alloy steel. 1045 can be flame or induction hardened to produce a good surface hardness with moderate wear resistance. EN8 is available from stock in bar and can be cut to your requirements. We also offer flame cut plates cut to your required sizes and normalised. 1045 plates can be supplied surface ground or precision ground.
We welcome export enquiries for carbon steel. Contact our sales office and consult our shipping policy for further details.
Analysis |
|
Form of Supply | YAOTENG Steel are steel stockholders and suppliers of 1045 carbon steel in round, square and flat bar. 1045 bar can be sawn cut to your required length. YaoTeng Steel can offer flame cut steel profiles in grade EN8, which can be surface ground if required. 1045 ground steel bar can be supplied, providing a precision ground steel bar to tight tolerances.
Contact our experienced sales team who will assist you with your 1045 medium carbon steel enquiry. |
Plate | Flat | Diameter | Hexagonal |
Flame Cut Profiles | YAOTENG Steel are suppliers of 1045 flame cut steel profiles. A hard edge can occur when flame cutting 1045 plate, therefore this grade is commonly normalised after flame cutting. EN8 flame cut profiles can be supplied Lumsden ground or precision ground. |
Ground Flat Stock | Precision ground flat stock / gauge plate can be produced using 1045 steel. Subject to size suitability and availability of raw material pieces can be produced in approximately 2 to 3 weeks. Standard and non-standard sizes are available. |
Applications | 1045 is widely used for many general engineering applications. Typical applications include shafts, studs, bolts, connecting rods, screws, rollers. |
Forging | Preheat the steel carefully, then raise temperature to 1050°C for forging. Do not forge below 850°C. After forging cool slowly, preferably in a furnace. |
Annealing | Heat slowly to 680-710°C, soak well. Cool slowly in the furnace. |
Hardening | Heat the component slowly to 820-860°C and allow it to be heated through. Quench in oil or water. |
Tempering | Temper the 1045 component immediately after quenching whilst tools are still hand warm. Re-heat the EN8 component to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. For most applications tempering of EN8 will be between 550-660°C. |
Welding | We recommend you contact your welding consumables supplier who should provide you full assistance and information on welding 1045 steel. |
Heat Treatment | Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each 1045 steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN8 carbon steel. |
Certification | 1045 carbon steel is available with a cast and analysis certificate or a BS EN 10204 3.1 mill certificate, please request when placing any orders. |
Quality Assured Supply | 1045 is supplied in accordance with our ISO 9001 : 2008 registration. |
Contact YAOTENG Steel with your enquiries for flame cut profiles, plate, round and flat bar in 1045 carbon steel. |
Q1: What is the Quality for the Control ?
A1: Before the steel round bar and steel plate products shipping, our product will 100% inspect by ultrasonic inspection. Quality Grade SEP 1921-84 E/e, D/d, C/c.
Q2: What is the mode of production?
A2: For the small size carton steel bar and plate products, we using the hot rolled, Diameter 10mm to 250mm,
For the large size carbon steel bar and plate products, we using the hot forged, Diameter 250 to 1700mm.
For the tool steel round bar and steel plate, we using the forged produce.
For the High-precision require , small size products, we using the cold drawn.
Q3:: What is our advantage products ?
A3:
1, Carbon steel material, we have professional apply to customs team and shipping workers,
so we can give you the Competitive price and ensure the delivery time is very short.
2, Our main products:
Hot work steel:
H13/1.2344/SKD 61/4Cr5MoSiV1, H11/ 1.2343/SKD6/4Cr5MoSiV, L6 / 1.2713 / SKT4/5CrNiMo, H21/1.2581/ SKD5/ 3Cr2W8V
Cold work steel:
D2/ 1.2379/SKD11/Cr12Mo1V1, D3/1.2080/SKD1/Cr12, A2/1.2363/SKD12/CrMo1V, O1/1.2510/SKS3/90CrWMn
Plastic mould steel:
P20, P20+Ni, 1.2311, 1.2312, 1.2083, 1.2316, S136, 718, NAK80
Alloy structural steel:
5120/1.7027/SCr420/20Cr, 530M40/1.7035/SCr440/40Cr, 5145/45CR4/45Cr/Scr445, 4118/1.7243/SCM418/20CrMo, 4135/1.7220/SCM435/35CrMo, 4140/1.7225/SCM440/42CrMo
High speed steel:
M2, M4, M35, M41, M42, SKH4, SKH51, SKH50, SKH55,SKH59, 1.3351,1.3348,1.3243
Q4: What is our delivery time?
A4: Our stock mateiral products Delivery time is 7 to 15 days, The Customized products delivery time is 25 to 45 days.
Scanning here Get Free sample!!
Or Send your Inquiry Details in the Below, Click "Send" Now!