Product Details

10 ports Managed Gigabit PoE switch with 8 ports PoE

Introduction

ES5010G-2GS-8POE-150W-P(220VAC) is Full gigabit , managed , 8-port Gigabit high power (IEEE 802.3at) PoE Switche,utilizing a compact factor which can be mounted in a 19-inch rack with rack-mounting kits or placed on desktop.
With data and power supported by one unit, the ES5010G-2GS-8POE-150W-P(220VAC) shall reduce cables and eliminate the need for dedicated electrical outlets on the wall,ceiling or any unreachable place. Auto PoE detection and Plug and play installation makes P3000M series Gigabit PoE Switch easy to use and with clear LED indicators to tell the working condition.

Features

1. Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W), can supply power to PDs under these two standards
2. Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs)
3. Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard POE devices or devices without POE function
4. Support port power supply prioritization, guarantee the continuous power supply of key nodes
5.Up to 100m network cable transmitting distance
6.Built-in PSE power supply module, plug-and play design, easy to install
7. High security performance defending against power surge
8.Support short-circuit protection function
9.Energy-saving green design, support auto-switch to standby mode and auto-detect cable length.
10.Support simple WEB management, easy to configure the functions of switches

Specification
Standard	IEEE 802.3af, Power Over Ethernet, IEEE 802.3at, Power Over Ethernet Plus IEEE 802.3u, 100BASE-TX, IEEE 802.3ab, 1000 BASE-T, IEEE 802.3z, 1000 BASE-X, IEEE 802.3ad, Static or Dynamic Link Aggregation, IEEE 802.3x, Full-Duplex Flow Control, IEEE 802.3az, EEE(Energy Efficient Ethernet), IEEE 802.1q, VLAN IEEE 802.1p, QoS/CoS, IEEE 802.1d, STP(Spanning Tree Protocol), IEEE 802.1w, Rapid Spanning Tree Protocol
Flow Control	Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode
Switch Properties	Transmit mode: Full wire-speed storage and forwarding 10M forwarding rate: 14880pps 100M forwarding rate: 148810pps 1000M forwarding rate: 1488100pps MAC address: 16K, Support auto-update, two-way learning VLAN: Support up to 4096 VLANs, Port-based VLANs, VLANs based on IEEE 802.1q Switching Capacity: ≥20Gbps Spanning Tree: Spanning Tree Protocol, Rapid Spanning Tree Protocol(RSTP), Link Aggregation:Support 8 aggregation groups, and a maximum of 4 ports in each aggregation group Ring Protection:Support Ring Protection, provide real-time detecting, quick alarm, precise localization, smart blocking and auto-recovery Port Isolation: Isolation between downlink ports without influence the communication between downlink and uplink ports Port Flow Control: Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode Port Rate Restriction: Port-based ingress or egress rate limiting Jumbo Frame: Maximum supports 9216 Byte Storm Suppression: Support the suppression of broadcast storm based on forwarding rate Multicast Control: Support IGMPv1/2/3 and MLDv1/2 Snooping; Security:Port-base MAC address binding,Security restriction on port-based MAC address quantity QOS: SP(Strict Priority), WFQ (Weighted Fair Queuing), WRR (Weighted Round Robin), 802.1p(Port Queuing Priority), Differentiated Service Code Point(DSCP Priority) IPv6:IPv6 Parsing PoE ouput priority Management: Supported
Interface	Fixed ports: 810/100/1000M PoE ports+2 Gigabit SFP ports POE Pin-out: 1/2(+), 3/6(-); Customized 4/5(+),7/8(-)
Transfer Medium	10/100Base-TX:UTP category 3/4/5 cables( Maximum 100m) 1000Base-T:UTP Category 5 cable( Maximum 100m) 1000Base-SX:fiber with 850nm wavelength,supports a max transmission distance of 550m 1000Base-LX: fiber with 1310nm / 1550nm wavelength, supports a max transmission distance of 80km Network Cable Deployment: Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable Negotiation Pattern: Support port auto-negotiation function ( automatically negotiate transmission rate and Duplex modes) Maintenance: Detect the connectivity of network cables,Uploading or downloading of the configuration data,Uploading of upgrade patch, WEB-based reset to factory defaults, Support port short-circuit reset to factory defaults Management: Support WEB-based management
Indicator	Interface light: Link/Act, POE Status Power light: PWR
Power Supply	Input Power Supply: 90~264VAC / 50~60Hz / 150W Energy Saving:Comply with “EEE” Energy Efficient Ethernet
Environment Requirement	Working Temperature: -20~50°C Storage Temperature: -40~70°C Operation Humidity:10%~90%(non-condensing) Storage Humidity:5%~90%(non-condensing)
Physical Characterisitics	Shell: metal shell Size(W×H×D): 280mm×180mm×44mm Weight:1800g Installation: Desktop mounting
Certification	CE, FCC, RoHS
Warranty	3 years
Packing List	1.10 Ports Managed Gigabit PoE switch ES5010G-2GS-8POE × 1 2. User manual × 1 3. Certificate of quality × 1 4. Warranty card × 1 5.Power line × 1

Dimension

Show Case

Shipping

Order Information

ES5010G-2GS-8POE-150W-P(220VAC):10 ports Managed Gigabit PoE switch(8 ports PoE) , Power Budget:150W