Specifications

10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network manage

3onedata Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.
Features

Hardware Function

1. Support 10Base-T, 100Base-TX, 100Base-FX 2 .Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x st andards 3. Up to 5km distance on multi mode optical port and 120km distance on single mode optical port 4. High-performance auto-negotiation chips make sure the data transfer with higher 5. Security, stability and without block. 6. Up to 1916 bytes package forwarded 7. Support half/full duplex mode Auto-negotiate 8. Low power consumption, low heat generation and excellent compatibility 9. 10 Watt professional communication power supply module inside the standalone. 10. Chassis supports double redundant power supply modules and each power supply module 11. Supports up to 100 Watt power output for the security and stability 12. Support hot-swap for all the modules, but not including management module 13. Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable Software Function

1. Support local and remote management 2. Support Console, WEB and SNMP management 3. Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version 4. View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status 5. Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps 6. Support remote loop back function, three loop back position selectable. Help to find out the line fault conveniently 7. Summarize the data flow information and show the communication state of each port 8. Support SNMP management. Set Trap Destination and Community Name, including the authority 9. Reset the system or a single module or the remote end device via management software 10. Reset chassis to factory default 11. Support online firmware upgraded 12. Show the detailed information of power supply, including AC/DC type and running status 13. Provide MIB file, make it easy to be integrated into the third party SNMP management software 14. Adopt the centralized management style and the tree-view catalogue, which can manage many sets of chassis at the same time in one single window. Meantime, it's very easy and clear to manage all devices even if many chassis in one window.

Device Size
Standalone: 132mm (width)*36mm (depth)*122mm (height)
19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)

Power
AC: 220VAC+-20%, 50/60Hz
DC: -40~-57 VDC
Power consumption: Standalone < 3W, Chassis full of modules < 50W

Update Date:2012-04-24 04:23:49