Product Details

8 ports Embedded Industrial Ethernet Switch Core Module

Introduction

IEM608 module is an embedded module designed to allow client’s industrial equipment to be provided with managed switch function. Adopting the modern modular design concept, which is simple and high-efficiency, this module makes the industrial equipment designers concentrate on their industrial design instead of figuring out complex network product design. It is widely used in such areas as electric power, water conservation, mining, chemical manufacturing, car, road monitoring, national defense and military.

Features

1. Support 8 Ethernet ports, all support 10Base-T/100Base-TX/100Base-FX(optical or electrical ports optional)
2. Support self-developed SW-Ring redundant network patented technology, many looped networks, failover time <20ms
3. Support Layer 2 protocols of Ethernet switch such as VLAN, QoS, Port Trunking, Port Mirroring, IGMP Static Multicast
4. Support rate limiting and broadcast storm control
5. Support Web, CLI, Telnet management
6. Support port data frame statistics
7. Support abnormal alarm
8. Support one-key configuration
9. Energy saving design, power consumption < 4W
10.Working temperature -40~85℃
11.Compact and integrated

Specification
Standard	IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.1Q, IEEE802.1X
Flow Control	IEEE802.3x flow control, Back pressure flow control
Switch Properties	Support 100 devices in a ring Line fault recovery time < 20ms (in full load) Forward speed: 148810pps Max filter speed: 148810pps Transmit mode: store and forward Switched bandwidth: 2.0G MAC table size: 2K Support port-based VLAN protocol Support 16 VLAN IDs, as many as 4906 VLANs can be built within the whole network
Interface	Ethernet port: 8 Ethernet ports, available to be set as electrical or optical port as required Redundant ring network port: 8 Ethernet ports, available to be set as redundant ring network ports Web setting port: All Ethernet ports come with Web setting, and support one LVTTL level serial port for serial Web setting Alarm port: Two LVTTL level monitor signal inputs provided for collecting alarm message of port and power abnormal One LVTTL level alarm message output, support local alarm and remote alarm of power, port link and ring network status
Networking	Single Ring, Tangent Ring, Star, Chain, Coupling Ring, Dual Homing Failover time < 20ms
Power Supply	Input voltage: 3.3VDC (±5%) Power Consumption: <4W
Environment Requirement	Working temperature: -40~85℃ Storage temperature: -40~85℃ Relative Humidity: 5%~95 %( no condensation)
Physical Characterisitics	Size (WHD): 72mm×54mm×9.5mm
Warranty	5 years

Dimension

Order Information

IEM608: 8 port(optical or electrical ports optional) Embedded Industrial Ethernet Switch Module, 3.3VDC