license plate backup camera license plate capture camera for car
Negotiable /Piece
Min.Order:50 Pieces
Shenzhen Auto-Vox Technology Co., Ltd.
license plate backup camera license plate capture camera for car /bus
Key Features
Wire Connection
When the camera is to be used for rear view with a monitor to assist with reversing, it should be wired as shown in Figure 2 below.
Camera Installation
A:Choose the proper position for screw holes and cable hole. Use a marker to mark points for the holes.
B:Use a good quality drill bit to drill the holes at the marked points.
C:Route the cable through the cable hole to the rear compartment and secure the camera with the screws. It is suggested to seal the holes with glass cement.
Mirror view and normal view is switchable
Mirror view and normal view is switchable via a step switch on the power box.
Mirror view is switched on when delivery. You can switch it to normal view subject to your specific needs.
Mirror view is usually used for rear view while normal view is usually used for front view.
Trade shows:
About us
As a well established manufacturer of car parking sensor, car rear view system, for over 6 years, we have gained trust from our customers world wide,owing to our beliefs in “Quality First”, “Customer Focus” and “Value-priced”. In recent years, we are devoting to cutting-edge products such as mirror monitor with GPS/DVR, intelligent parking assist system, CANBUS car alarm and etc.. To satisfy our customer best and increase our growth, we are constantly making innovative products. Cooperate with us, we serve you for your convenience, your concern and your content!