Instant PVC materials(thick card)  Overlay card:

 This is a specially in card making materials with Adhesive Sticker by itself, In connection with finished ID cards(Access Control card ,meal cards) , student cards etc.can adapt to individuation patten Design,Gluding in Finished Cards and general purpose on any surface,having easy to use ,fast and lower cost features,Completing work out the problems of the higher cost or unable design.

The process of making Overlay cards:Design—printing--laminate—puncher—paste—complete

Low-cost laminator is insteaded of the higher lamination eqiupments,can Making kinds of different card series with low-cost and samll quantities,like this overlay card is more suitable to using in Contactless chips Card ,can 100%waterproof in finished cards,with strong Wettability, colors and patterns are hardly to fall.

For example: Access Control card, it’s not only very simple-fast making , but also reuse ,so don’t worry the wast of the working card,due to the turnover of staffs .

Materials:Printing materials+ lamination bottom material

Specification:200*300*(0.15+0.08)

Colour:white,golden,silver

Free laminated veneer card production steps:

1 design, good arrangement.

2 prior to printing, set mirror print, paper type select photo quality ink jet paper, setting the highestprecision.

3 print material is placed in the printer ( must pay attention to which side for the print surface ), andprint.

4 will take gum materials at the end of the transparent protective film is tore, print materials andmaterials at the end of the stack together, alignment ( print face bottom material).

5 plastic sealing machine for plastic, plastic temperature of 135℃.

6 plastic completed, cut in half, as the red card to prepare.

7 the cut material is placed into the cutter alignment, forced the fast downward move the handle, a molding.

8 the bottom material behind the shape from the paper tore, affixed with non-contact type IC card.

Attached to: laminated veneer and veneer card information printed cards

Laminated veneer card material stacking:

Steel plate

Adhesive film

Printing material

Divorce paper

Printing material

Adhesive film

Steel plate

Material: 0.15 ( or 0.13 ) print material +0.08 adhesive film + double-sided adhesive

Note: double-sided adhesive in laminated good stick, stick after molding. At last they need whenopened the shape from the paper pasted on the contactless chip card.

Printing veneer card: in the mass production of veneer card use.

The pattern is printed on the transparent substrate, and then brush the special layer, finally cover thedivorce paper, OK.