Multi-function 12V Jump Starter 8000mah/ charge for a variey of digital electronic products
Negotiable /Piece
Min.Order:10 Pieces
Shenzhen HYCO Technology Co., Ltd.
Multi-function Jump Starter 8000mah/ charge for a variey of digital electronic products
CAUTIONS:
To avoid cause accidents, make sure note the following cautions:
1. Take off the main unit within 30 seconds after starting the car.
2. Don't clip the two terminals at the same end on the battery.
3. Don't Disassemble the unit!
Product Highlights:
* The smallest and lightest portable power with patented technology in the current market.
* Use 8000mAh high capacity high power polymer cells, fast charging and low self-discharge, cycles can reach 3000 times.
* Support 12V car for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4.
* Multiple safety protection design to ensure the product has zero defect.
Product parameters:
Size: 13.5 * 7.8 * 3.3cm
Weight: 500g
Output: 5V/2.1A/1A; 12V/2A;
Input: 15V/1A
Starting current: 200A
Peak Current: 400A
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged.
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5, Press the switch five seconds to start If you want to use LED for illumination and select the status ( light, strobe, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.