Inset the power supply of machine into the socket, Turn on the power supply, If the indicator light of power supply is working, the machine is working.

Turn on  the heated switch ,the indicator light is on ,The show window of PV shows instantaneous temperature , The show window of SV shows anticipated designed temperature ,The machine begins to heat ,When the test temperature of PV reaches the anticipated designed temperature, The calefaction automatically stops ,Turn on wind engine ,and refrigerate the certificate card needed compound in the exit of material in order not to change shape .

Turn on the heated switch ,The show window of PV shows instantaneous temperature, Now you can adjust the anticipated temperature ,The process of adjust: first press the  key of set of PV in right-down , The number of SV twinkles; Second adjust the needed temperature through emblem  of PV ;Third press the key of  set, The show window of SV shows temperature which has been adjusted ,The number doesn’t twinkle any more , Enactment of the temperature completes .When the needed temperature of compounded material  reaches the ordinary specification of 0.8 mm thickness before ,The adjust of machine is over . 

 

Correctly reduplicate the needed compound certificate card according to the order of up-middle-down, Put it in the entrance material of machine ,Gently push material into machine ,The certificate card which has been compounded will automatically vent from the hell of machine after several seconds .The abnormity happens in the compounded process ,please immediately press the reversal switch of machine ,Quit the material from the machine ,and put it again into machine after adjusting .

The compounded temperature (for reference):

If the compounded thickness is around 0.5mm, it is 78 degree; if the compounded thickness exceeds 1mm, it is 92 degree.

Voltage: AC220V 50/60HZ

Power: 650W

Compound model: multi-axes plane heat compound

Compound press: 30Pa-50Pa

Compound thickness: 0.3mm--1.2mm

Compound size: width max 260mm

Weight machine: 16kg

Figure size: 430mm*340mm*150mm
items of attention:

Prohibit dousing water on machine and putting anything in the machine when it works .