2.4GHZ 3.2 inch Digital Wireless baby camera monitors, night vision support take photo video
Negotiable /Piece
Min.Order:1 Piece
Shenzhen HYCO Technology Co., Ltd.
2.4GHz Wireless 3.2 "wireless baby monitors
1. 100% digital signal for superior clarity and range
2. High Quality H.264 video signal encoding/decoding with 20-25 frames per second transmission
3. Supports up to 4 cameras
4. Take snapshots (pictures), video recording (manual record, motion detection record)
5. Support TF (Micro-SD) up to 32GB capacity
6. Motion Detection Alert (Monitor Beeps when Motion is Detected)
7. View recorded video and Snapshots on the monitor
8. Over 250 frequency-hopping sequences to minimize interference
9. Digital security for complete privacy neighbors cannot get audio or video from your camera(s)
10. Wireless transmission range of approximately 600 feet (200 meters) line-of-sight (open area).
11. Portable camera and monitor (w/ rechargeable batteries)
12. Automatic infra-red night vision technology (approximately 10 feet night-vision range)
13. Digital zoom with selectable regions
14. Adjustable volume level
15. Sleep mode with Voice Activation (VOX) to save power
16. Set up to 5 alarm settings (e.g. use it to setup, up to 5 feeding/medicine-reminder alarms during a 24 hour period repeat everyday)
17. Multi-Language Support (English, French, German, Italian, Spanish)
18. Both camera and monitor work with 3 different power sources; A/C adapter, Computers USB port or 3.7V Li-ion battery (AC adapters & batteries and a USB cable included with the system)
Specifications:
Supply Voltage:5V DC, 1000mA AC adapters, computer's USB port or 3.7V Li-ion battery
Transmission Frequency:2.4GHz (ISM band)
Video Encoding/Decoding:H.264
Audio Encoding/Decoding:SPEEX
Transmission Power:20dBm
Transmission Rate:3Mbps
Power Consumption:350~400mA (Camera) 300 ˜ 350mA (Monitor)
Audio Sampling Rate:16kHz (16bit)
Frequency Responds:20Hz - 20kHz
Camera Sensor / Resolution:CMOS / 640 x 480 (VGA)
Monitor Type / Resolution: 3.2" TFT LCD / 320 x 240
Video Frame Rate:25-30 fps (Typical - with no interference)
Total Harmonic Distortion:< 0.05%
Signal to Noise Ratio: ≥75dB
Receive Sensitivity:< -90dBm
Battery Recharging:5 hrs with device powered off (not in use), 10 hrs with device powered on (in use)
Battery Usage (Camera and Monitor): ˜ 3 hrs - continuous use ˜ 4-6 hrs (with power save/audio only mode)
Monitor x 1
Camera x 1
A/C Adapters (2) INPUT: 100V-240V 50/60Hz OUTPUT: 5V 1000mA x 2
Rechargeable Battery for the Monitor (camera has a built-in rechargeable battery) x 1
USB Cable x 1
Camera Stand/Wall Mount x 1
Monitor Stand x 1