Specifications

1.We can produce by ourselvesin all manufacturing process
2.Ensure the product quality
3.Reasonable price!

     Plastic defoaming masterbatch also known as desiccant masterbatch or plastic defoaming agent, the appearance of the goods for the off-white granules.    

 

 

It is a new kind of functional masterbatch that solve the moisture problem,

The technology is the world's leading and an initiative domestically.

Specifications:

Origin	China Shandong
Factory  code	XPBX01-03
Product appearance	granule was elliptical
Color	grey or greywhite
Product size	2-5mm
Content of 215-138-9	≤80%
215-138-10 size	≤18um
Melt index	6-7g/sec
Water absorption	can absorb the water equivalent of 20% of its own weigh

    

  If adding our desiccant masterbatch, you can benefit a lot:

 

Feature	(1)Don't need drying process for plastic raw material any more; (2)There is no harmful for energy of physical mechanical    (3)Can use the ordinary equipment but no change the processing technic; (4)This masterbatch have non-toxic tasteless, non-corrosive and harmless to humans. (5)Largely improve the mechanics property and appearance of plastic products. (6)High quality helps you reduce your cost and increase profits. (7) they can absorb the moisture strongly in the plastic, eliminate the bubbles, crack, speckle and other questions caused by moisture.
Application	It`s widely used in eliminate the bubbles.crack.speckle and other questions caused by moisture and so on
Use and ratio method	Adding amount is within 1%-5%, without baking raw materials(moisture content under 1%),by mixing until just combined, according the moisture of raw material to regulating the add ratio, for example : If the moisture content of raw materials out of requirement, we need to make these material drying until up to the standard then add this products mixing uniformity.
Packing	The products packed in carton with outer plastic coated and inner plastic woven bag, 25kg net each.
Storage	Store in cool, dry and ventilated place.Don't allow masterbatch in open storage,after opening the packing, left masterbatch should be sealed immediately to keep dry. Avoid direct exposure to the sun as well as heat source and humidity

 

 

 

Caution:The well mixed masterbatch with raw materials and plastic must be used up within eight hours, otherwise, the desiccant masterbatch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of plugging the filter .

 

 

 

South Africa Plastics and Rubber Expo. (2013)

 

 

 

 

If you are interested in our products,do not hesitate to contracr us!

 

 

Hot products:

 

 

 

BoXuan  would be your best choice!  welcom to visit our factory and negotiate!