Specifications

1.Gabion Wire Mesh
2.Hole:Hexagonal
3.Wire Gauge:BWG12-BWG24
4.Mesh:60*80,80*100,100*120mm
5.Application: Gabion Mesh

Assortments Available: Electro Galvanized before Weaving Electro Galvanized After Weaving Hot Dipped Galvanized before Weaving Hot Dipped Galvanized after Weaving PVC Coated Before or After Weaving Stainless Steel Wire Galvanized Drawn Iron Wire

Galvanized hexagonal wire netting mesh Min. Gal.v. G/SQ.M Width Wire Gauge (Diameter) BWG Inch mm Tolerance(mm) 3/8" 10mm ±1.0 0.7mm - 145 2' - 1M 27, 26, 25, 24, 23 1/2" 13mm ±1.5 0.7mm - 95 2' - 2M 25, 24, 23, 22, 21 5/8" 16mm ±2.0 0.7mm - 70 2' - 2M 27, 26, 25, 24, 23, 22 3/4" 20mm ±3.0 0.7mm - 55 2' - 2M 25, 24, 23, 22, 21, 20, 19 1" 25mm ±3.0 0.9mm - 55 1' - 2M 25, 24, 23, 22, 21, 20, 19, 18 1-1/4" 31mm ±4.0 0.9mm - 40 1' - 2M 23, 22, 21, 20, 19, 18 1-1/2" 40mm ±5.0 1.0mm - 45 1' - 2M 23, 22, 21, 20, 19, 18 2" 50mm ±6.0 1.2mm - 40 1' - 2M 23, 22, 21, 20, 19, 18 2-1/2" 65mm ±7.0 1.0mm - 30 1' - 2M 21, 20, 19, 18 3" 75mm ±8.0 1.4mm - 30 2' - 2M 20, 19, 18, 17 4" 100mm ±8.0 1.6mm - 30 2' - 2M 19, 18, 17, 16

Note: 1.) The above tolerance comply with standard EN10223-2:1997; 2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.

PVC Coated Hexagonal Wire Netting Mesh Wire Gauge (MM) Width Inch MM - - 1/2" 13mm 0.6mm - 1.0mm 2' - 2M 3/4" 19mm 0.6mm - 1.0mm 2' - 2M 1" 25mm 0.7mm - 1.3mm 1' - 2M 1-1/4" 30mm 0.85mm - 1.3mm 1' - 2M 1-1/2" 40mm 0.85mm - 1.4mm 1' - 2M 2" 50mm 1.0mm - 1.4mm 1' - 2M Five Star also offer other specifications you need

Note: The thickness of PVC Coating is usually 0.2-0.4mm, others may arranged as per buyers' request; Package: Normally each roll packed in water proof paper, then in termo foil (Shrinked Plastic);