Product Details

m8 din582 stainless steel ring nut,eye bolt (DIN582)

Product Description

Forged Eye bolt, Lifting Eye Bolt, DIN 582 eye nut
Surface: Galvanized, zinc plated, chromed plated
Material: Carbon steel C15, C15E, SS, Q235 etc
Type: C15, normal WLL and specification, or as you needed
Packing: Plastic bags, carbon boxes, wood pallets and iron pallets
Thread rolling: Threads under metric system or British system
Packing: Carton +Pallet

Instructions for the use of lifting eye nuts DIN 582
Lifting eye nuts conforming to this standard are primarily intended as permanent attachments on
Equipment such as motors, control cabinets, gear boxes, etc. For their transport. When used as temporary
Attachments on larger objects such as large tools for transportation only, the next largest thread size
Should be used. In case of multi-leg slings please refer to DIN EN 818-4.
With the use of screws a washer should used under the head.
Picture 1 — Side pull must be avoided
Before being used, eye nuts should be checked for correct seating and apparent damage (e. G. Corrosion,
Deformation)
Deformed eye nuts should be discarded.
Subsequent color identification (particular in red) must be avoided, to exclude any confusions with highstrength attachment points.
The safe working load values given in table 1 are based on the following assumptions:
· The eye nut is fully tightened by sufficient thread depth;
· The eye nut must be in the correct plane and the collar must sit evenly on the contact surface;
· The length of the bolt thread is sufficient
· The material of the bolt on which the eye nut will be screwed is of adequate strength

Detailed size:

SIZE	WLL	WLL	DIMENSIONS							Weight
d	t	t	DIMENSIONS
			d1	d2	d3	b	e	h	k	%kg
			mm	mm	mm	mm	mm	mm	mm
M6*	0.07	0.05	17	28	16	13	6	17	6	5
M8*	0.14	0.095	20	36	20	15	6	18	8	6
M10*	0.23	0.17	25	45	25	18	8	22	10	11
M12	0.34	0.24	30	54	30	22	10	26	12	18
M14*	0.49	0.34	35	63	35	28	12	30	14	28.5
M16	0.7	0.5	35	63	35	28	12	30	14	28
M20	1.2	0.83	40	72	40	30	12	35	16	45
M22*	1.5	1.05	45	81	45	35	14	40	18	67
M24	1.8	1.27	50	90	50	38	16	45	20	87
M27*	2.5	1.65	50	90	50	38	18	45	20	88
M30	3.6	2.6	65	108	60	45	18	55	24	166
M33*	4.3	3.2	65	108	60	45	22	55	24	172
M36	5.1	3.7	75	126	70	55	22	65	28	265
M39*	6.1	4.3	75	126	70	55	26	65	28	280
M42	7	5	85	144	80	65	30	75	32	403
M45*	8	5.5	85	144	80	65	30	75	32	425
M48	8.6	6.1	100	166	90	70	35	85	38	638
M52*	9.9	7.3	100	166	90	70	35	85	38	660
M56	11.5	8.3	110	184	100	80	38	95	42	880
M64	16	11	120	206	110	90	42	100	48	1240