Specifications

1)Slotting Cutters
2)round saw cutters
3)t-slot cutters

Solid Carbide Slotting Cutters  & Slotting Saws Blades for Special Form cutter
  1/ GENERAL INTRODUCTION:
Industrial Range

Industrial Range Tungsten Carbide Tipped saw blades are precision manufactured to the highest standards for accuracy and durability. Incorporating heavy gauge, hardened, tempered, ground, smithed and blocked saw bodies, with industrial grade tungsten carbide saw tips.

Industrial saw blades fall into four general catagories, Rip, General Purpose, Crosscut, and Fine or Trimming.

Rip blades have large gullet space for chip clearance and rapid cutting with the grain.

General Purpose blades provide a good finish and can be used for finer ripping or rough crosscutting.

Crosscut blades have more teeth and are used for cutting across the grain.

Fine or Trimming blades have as many teeth as possible to provide a good clean finish for accurate sizing and trimming of timber and various materials like plywood and particle boards.

Non Ferrous

There are two types of Non Ferrous Tungsten Carbide Tipped saw blade.

Non Ferrous Section blades are for cutting hollow and solid sections of aluminium and other non ferrous materials.

Non Ferrous Extrusion blades are for cutting thin walled extrusions of aluminium and plastics, and are normally with a negative tooth angle.

Negative Rake

Negative Rake Tungsten Carbide Tipped saw blades are specially designed with a negative tooth angle for cutting across the grain and trimming with radial arm and pull over saws, and for cutting mitres.

 

2/SPECIFICATION OF SAW DISC TIPS

 

Types of discs				unit:mm
TYPE	D	d	S
Φ12×Φ6×S	12	6	0.6-4.5
Φ13×Φ6×S	13	6	0.6-4.5
Φ16×Φ6×S	16	6	0.6-4.5
Φ22×Φ10×S	22	10	0.6-4.5
Φ25×Φ12×S	25	12	0.6-5.5
Φ32×Φ10×S	32	10	0.8-5.5
Φ40×Φ10×S	40	10	0.8-6.0
Φ45×Φ13×S	45	13	0.8-6.0
Φ53×Φ13×S	53	13	0.8-6.0
Φ52×Φ24.5×S	52	24.5	0.8-6.0
Φ53×Φ24.5×S	53	24.5	0.8-6.0
Φ55×Φ16×S	55	16	0.8-6.0
Φ58×Φ22×S	58	22	0.8-6.0
Φ60×Φ19×S	60	19	0.8-7.0
Φ63×Φ17×S	63	17	0.8-7.0
Φ70×Φ22×S	70	22	0.8-7.0
Φ75×Φ22×S	75	22	0.8-7.0
Φ80×Φ22×S	80	22	0.8-7.0
Φ83×Φ21×S	83	21	0.8-7.0
Φ86.5×Φ21.5×S	86.5	21.5	1.0-7.0
Φ90×Φ22×S	90	22	1.0-7.0
Φ100×Φ22×S	100	22	1.0-7.0
Φ125×Φ22×S	125	22	1.0-7.0
Φ200×Φ70×S	200	70	3.0-4.5
Φ250×Φ70×S	250	70	3.0-4.5
Φ250×Φ95×S	250	95	3.0-4.5
Other types may be offered by customers' requirement