Specifications

stainess steel brad hole tee nut 3/8"
1.material:steel,stainless steel ,etc
2.finish:zinc ,nickel,etc
3.various size is ok

  stainess steel brad hole tee nut 3/8"

size	3/8"
height	7/16"
hole	three hole
diameter	3/8"
thread type	coarse
non standard	yes
packing	15kg/carton,36cartons/pallets

 

  Round base t-nuts are nice because they are easier to install than 4 prong t-nuts.

They are used in most commercial climbing gyms because they are easy to install and stay secure.

Unlike 4 prong t-nuts you don't need two people to install them properly. You can insert them by hand into the pre-drilled holes in your climbing wall. There are 3 holes in each t-nut which allow you to fasten a couple screws into the wood from behind the wall. These screws will keep the t-nut from spinning and from popping out when you try to fasten a hold to the wall. 3 zinc plated screws are included with each t-nut ordered. If you are willing to spend the extra money you'll save a lot of time!

 

1.Material: Carbon steel, alloy steel. Stainless steel 

2.Standard: DIN 557/DIN562/DIN798/JIS B1163 
3.Grade: 4, 6, 8, 10 etc 
4.Surface Finish: Zinc plated. Black, plain, hot dipped galvanized, etc 
5.Size: From M6-M24
6.finish:black ,plain,zinc ,plain,etc

7.OEM accepted 

petitive price and high quality

9.main market: Italy,England,Russia,Turkey,America,Canada,Brazil, Argentina,Peru,Ecuador,South Africa, Australia, New Zealand, Iran, etc

 10. Application 

Sometimes old T-Nuts become damaged with use or are lost when furniture is moved. Damaged or lost T-Nuts need to be replaced. T-Nuts provide the nut base into which the hanger bolt of a furniture leg may be screwed. The hanger bolt screws into the T-Nut and extends up into a cavity predrilled to sufficient width and depth to contain the screwed in hanger bolt. 
11. Note about Size 
The size of the hanger bolt determines what the size the T-Nut needs to be. These T-Nuts fit the Metric Size M8 Hanger Bolts. It is important to select the proper size T-Nuts for your hanger bolts. 
12. Installing the T-Nut 
Select the location for the T-Nut installation 
If a cavity is already present for the screwed in hanger bolt, all that needs to be done is to tap the T-Nut into the proper location with the sleeve of the T-Nut extending into the already present cavity. 
If no cavity is present for the sleeve of the T-Nut and the hanger bolt, a new cavity will need to be drilled at the proper location. After the cavity is drilled, then the T-Nut may be tapped into the installation site. 
The furniture leg is then securely screwed into the T-Nut and the installation is complete 

 

Photo:

 

 

 

 How to install t nuts: