Product Details

lifting eye bolt din580 eye bolt ( DIN580 )

Product Description

Forged Eye bolt, Lifting Eye Bolt, DIN 580 Eye Screw
Surface: Galvanized, zinc plated, chromed plated
Material: Carbon steel C15, C15E, SS, Q235 etc
Type: C15, normal WLL and specification, or as you needed
Packing: Plastic bags, carbon boxes, wood pallets and iron pallets
Thread rolling: Threads under metric system or British system
Packing: Carton +Pallet

User information for lifting eye bolts DIN 580
Eye bolts conforming to this standard are primarily intended as permanent attachments on equipment such as motors, control cabinets, gear boxes,
Etc. When used as temporary attachments on larger objects such as large tools for transportation only, the next largest thread size should be used.
The safe working load values given in table 1 are based on the following assumptions:

The capacity specied in the second line of table 1 applies up to an inclination angle of 45° . The capacity specied in the third line applies for laterally
Inserted eye bolts applies up to an inclination angle of 45° In all directions in regard to the ring level. Lateral pull should not be applied (see picture 2).
Before being used, eye bolts should be checked for correct seating and apparent damage (e. G. Corrosion, deformation). Deformed eye bolts should be
Discarded. In eye bolt assemblies with clearance hole, a washer and nut (not thin nut) should be used.

Detailed size:

M	A	B	C	D	E
Size	Out circle	Inner circle	Material	Weight/	Pcs/bag
6	28	16	c15	0.05	700
8	36	20	c15	0.06	700
10	45	25	c15	0.11	350
12	54	30	c15	0.18	200
16	63	35	c15	0.285	125
20	72	40	c15	0.45	80
24	90	50	c15	0.87	40
30	108	60	c15	1.66	25
36	126	70	c15	2.65	15
42	144	80	c15	4.03	8
48	166	90	c15	6.38	6
56	184	100	c15	8.8	4
64	206	110	c15	12.5	3
72	260	140	c15	23.3	1
80	296	160	c15	34.2	1
100	330	180	c15	49.1	1