Specifications

Introduction

It has small contour design, which does UV spray finishing for the whole body. It is very fashionable and wearable and matches with all kinds of portable tools. 

*Operating instruction

1.How to swith on/off?

.Press the power key for 2 seconds to start the device. It flashes a time and gets into the standby mode. Meanwhile the blue LED indicator is on.

.Long press the key again,then will off at once.

2.How to video recording?

.In the standby mode, short press the video/photo key, the red and blue LED will take turns to flash, means it starts record.

.During the video, short press video/photo key, the red LED will be off.The video was saved automatically and return to the standby mode.

3.How to sound control video?

.In the standby mode, short press the mode key,the red&blue LED will flash in turns. If the external sounds exceeds 60decibles, it will begins to record automatically,

.During the recording, the LED indicators flash slow.

.During the video, short press video/photo key, the blue LED will be on.The video was saved and return to the standby mode.

4.How to be a web camera?

.In the standby or OFF mode, connect the device with the computer. The computer will pop up a removable disk logo. There is an image file directory for Disk/ VIDEO,PHOTO.Short press the mode key then it become a web camera.During video recorder and computer transfer data, the blue light flashes tardily.

.For the disconnection, please click’ SAFELY REMOVE HARDWARE’ on the right bottom corner for the task bar. Then click to stop the’ USB mass storage device’. Unplug the USB. The disconnection completes.

5.How to charge?

Connect to computer USB interface or charger. During the charging, the blue light flashes slowly. When the battery is fully recharged, the orange light stops flashing(the process needs about 3hours)

6.How to set time?

Turn off the camera---connect the computer---open the removable disk---select TAG documents and open---revise(the time will stop updating when extract the TF card).

Parameters

*Introduction