Product Details

Radio over IP ROIP Gateway PTT board

Product Description

1. Capacity: 0-4 E1 ports, 16-192 ports FXS/FXO to SIP, 1-500 SIP subscriber, 0-96 GSM Ports, X86 board, PTT board.

2. Used for IPCC, IP Dispatch, Unify Communication, VoIP network, operators, and so on.

3. Standard Rackmount.

4. Certification: ISO9001, CE, ROHS

Advantages of our products:

Modular Design, Easy Expansion.

All kinds of our products use modular design, it is very easy to expand capacity by inserting modules. At first, you can place an order with small capacity, after testing, if you want to expand, it is no need to change a device, just need to buy some modules, it is very convenient.

All kinds of signalings on E1 ports.

We have been producing E1 products from 2001 year. So we have excellent experience on E1 ports, they support all kinds signaling like ISDN PRI, SS7, R2/CAS, Q.SIG, V5.2, DPNSS, etc. Make connection between different signalings or between PSTN and Ethernet.

All

-in one interface on one device.

With independent self-development ability, all kinds of interfaces can be supported by one device in our company: E1, FXO/FXS, GSM/CDMA/WCDMA, E&M, Magnet, Radio/VHF/PTT, X86/MIPs. You can install your own software into our gateway by X86 or MIPs card.

Overview:

Integrated Access Device Communications series is to develop products for specific applications, using the industry's popular chip technology to support E1, GSMWCDMA, PTT interfaces, FXO FXS, SIP, IMS interface, support for X86 industrial control panels, supports up to 4 ports E1T1, 96 ports GSMCDMA, 192 ports FXOFXS, 128 SIP trunks. Mainly used in IPCC, IP Dispatching, unify communications and some specific industries.

Host box description:

32 ports FXS Integrated gateway NC-MG320-X chassis contains two slots: one is for MCU card, aother is for various business cards.

NC-MG320-X uses advanced hardware and software technology and carrier-class design to ensure the high reliability of equipment. The system of NC-MG320-X uses the mature high-performance CPU and DSP; and uses embedded real-time operating system and efficient algorithm, so it has excellent properties.

Introduction for each kind of board:

1. Power supply board:DC-48V or AC 110-240V;

2. MCU board: 1-4 E1 interface support for SS7PRIR2Q.SIGV5.2 signaling, 128 G.711 channels, 64 G.729, G.723, G.726 channel, 32 T.38 fax channels.

3. PTT interface board (Push to Talk, or RoIP):1-4 PTT interfaces, complete intercom voice signals into IP signals, access to the Professional Edition or Standard Edition RoIP groups to achieve the client and the host or the PSTN intercom communication.

4. GSMCDMAWCDMA interface board: 8 channels GSMCDMAWCDMA interface module supports voice and sms.

5. Analog User board: 16 ports FXOFXS module supports hot-plugged.

6. LAN switch board: as one LAN switch with 6 ports 10/100M.

7. Computer X86 Industrial Module:

·CPU: Intel Atom Dual Core N2600 1.66 GHz;
·1 x 2/4GB CF on PCIe
·1 x 32GB mSATA SSD on mSATA port

·1 x 500GB SATA on SATA port (Notebook hard drive)
·2 x USB 2.0 ports on front panel

·2 x 10/100/1000 Ethernet ports on front panel
·1 x RS-232 Serial port (as Console) on front panel
·1 x Audio In port on front panel
·1 x Audio Out port on front panel
·1 x VGA port as pin-header on x86 board (VGA port can be used with a cable)
·1 x Additional USB 2.0 port on x86 board as pin-header
·1 x Additional RS-232 port on x86 board as pin-header
·1 x software programmable button on the front panel

8. MIPs board:

·Basic: 4-core, 1.2GHz, 1G or 2G memory, and eMMc 8GB;

·Additional function 1: 16 ports FE as LAN switch;

·Additional function 2: Ethernet Mirror;

Both X86 and MIPs boards are hardware, they are used for installing/loading customers’ own software.

9. E&M board:2 wire or 4 wire E&M; Support three standard types: I, II, V; Hot-plugged;

Each board supports 4 or 8 ports E&M; the physical specification of E&M port is RJ45.

Audio gain of each port can be adjusted independently by software.

Function and Features:

Carrier-class reliability

·With a new generation of processor, a separate high-end DSP processing chip and powerful hardware processing, ensure that the equipment at full load conditions remained stable and reliable;

·99.99% availability, support continuous long talk at least 48 hours;

·Support over-current protection function on POTS interfaces ;

·Support the protection of lightning, surges, power lines and other protective lap;

·Full compatible;

Excellent voice communication quality

·Voice Activity Detection (VAD), to effectively save bandwidth resources;

·Comfort Noise Generation (CNG), to provide the same experience as PSTN in calls;
·Adaptive dynamic buffer technology, to meet the application under bad network;

·G.168 128ms echo cancellation technology. This indicator is far higher than the same kind of PBX, eliminating the echo interference caused by long distance call;

·DTMF detection / generation technology, to effectively support the business of the fax, callback, second dial.

Plentiful business functions

·Modification between calling number and called number;

·As a terminal, support the register trunk function to other GK(Gatekeeper) or SIP Server.

·As a gateway, support the control from superior GK or SIP Server to complete the trunking calls;

·Support any switch among E1, GSM, PTT, FXO, FXS, SIP, IMS;

·Support automatic routing function;

·Support high capacity of black and white lists;

·Simultaneously support the register of 4 SIP Server;

·Support output of CDR;

·Fax support T.30, T38 and pass through;

·Support reelection function;
·Support detection of calling number and display of call ID;

·Support generation of dial tone, ring back tone, etc.;

·Port supports gain and comfort adjustment of noise;

·Multi-router and multi-bureau management, group, cluster and exchange management, intelligent routing distribution and equal traffic sharing;

·Support function of dividing groups, for the incoming calls, the subscriber line can be set to line up or take turns to choose;

·Flexibly control the incoming and outgoing of lines, the lock of long-distance calls can be controlled by the phone;

·Complete call functions,it can provide several kinds of call functions and special call way by customer's request;

·The voice processing capacity support voice play with built-in computer operator;

·High processing capacity in conference;

·Monitor and handle real-time telephone traffic;

Simple and convenient management/maintenance

·The way of management on software: Local and remote WEB; Local and remote Telnet; Console port-Super terminal;

·On hardware, with rack design, they can be installed in the standard 19 inches rack, also can be separately installed in a small machinery room. (In a standard 19 inches rack, NC-MG320-X is 2U height, NC-MG930-X is 3.5U height.)

Protocol&Interface

Item Name	Details
Port	E1 (ISDN PRI, SS7, R2/CAS, Q.SIG, V5.2, DPNSS), FXO/FXS, GSM/CDMA/WCDMA, E&M, PTT, LAN, Industrial computer and SIP, etc.
VoIP Protocol	SIP: RFC3326(Reason header in SIP messages) RFC3372(SIGTRAN and SIP-T) RFC2327(sdp) RFC3398(ISUP-SIP Mapping) RFC3261(sip) RFC5806(Diversion Indication in SIP) RFC2833( DTMF ) RFC3362(t.38) RFC 3261(SIP 2.0) RFC3204(MIME media types for ISUP and QSIG Objects) RFC3578(Mapping of ISUP overlap to SIP)
Codec	G.711 U-Law and A-Law, G.711 Appendix 1, G.723.1 and G.723.1 Annex A, G.729 Annex A and Annex B, G.726,GSM,ARM,ILBC
Fax Protocol	T30, T38 and pass through
Network Protocol	IP,NAT,ICMP,ARP,HTTP,BOOTP,FTP,TFTP,DHCP,PPPOE,SNMP,Diff-Serv
Echo Cancellation	G.168 128ms

Physical Features:

Item		Specification
Input Voltage		110-240V AC or -48V DC
Full-load Power		30W
Dimension		(W×D×H)	482mm286mm88mm (2U)
Weight			10 KGS
Environment	Temperature		0°C~50°C
	Relative Humidity		Less than 80%

Specification

Item	NC-MG320-X	NC-MG640-X	NC-MG930-X
Analog FXS Interface	32 ports	64 ports	192 ports
FXO Trunk	32 ports	64 ports	192 ports
E1(PCM) Trunk/ISDN Port	0 to 4 E1	0 to 4 E1	0 to 4 E1
GSM/CDMA/WCDMA ports	16	32	64
VoIP IP Channels (SIP trunks)	32	128	128
IP Terminals/SIP users	16 to 1024	16 to 1024	16 to 1024
E&M ports	16	32	96
PTT (Push To Talk) lines	8	16	48
MIP cards (used to install customer's software)	Available
Ethernet Interface	2 LAN ports (10/100/1000M Base-T)
Console Port	1 RS232 port
Compatibility	Asterisk, Free switch, 3CX,CISCO, Siemens, AVAYA, Huawei, ZTE, etc.
Input Voltage
Power	40W	80W	150W
Telephone Line Transmission Distance (KM)	5	5	5
Device Dimension (MM)	48028644 (2U)	48030088 (2U)	480300160 (3.5U)
Weight (KG)	5.5	7.5	10.5
Work Environment	0℃~50℃, Less 80%

Details Picture

Application&Solution

Application Secenerio 1 or Solutions 1 of Integrated Access Gateway NC-MG320-X

Factory&Services

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory in Telecom product from 2000 year.

Q: How long is your delivery time?

A: Generally it is 2 days only, or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: How long is warranty?

A: Usually warranty is one year. If you need, we can provide with 3-years warranty.

Q: How is the technical support?

A: 7*24 hours support for ever.

Q: How can I get a sample?

A: By place an order or pay a rent, then we will ship in 2 days by Express.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.

As one supplier of Huawei, we will provide you with Huawei's quality by low price. Please feel free to contact us from now, thank you. (skype:nice_fiona)