Product Details

Specifications

Medical Heat Sealable Surgical Glove Coated Paper Roll
1.EO/STEAM,GAMMA sterilization
2.1000meters/roll
3.for packing syrige

Medical Heat Sealable Surgical Glove Coated Paper Roll

Product Description

The performance of our Medical Heat Sealable Surgical Glove Coated Paper Roll

1. 63gsm /73gsm medical paper coated /adhesive side.

2. to be heated with blister film (pp/pe .pa/pe film)

3. suitable for Gamma Radiation ,eto well.

4. can be OEM printing four colours in the paper .

5. usually for packing infusion sets ,syringes and etc .

6.can be heat seal with CPP/PE,CPP/PET,PP/PE,PA/PE film

suitable film : 100micron .

Medical Heat Sealable Surgical Glove Coated Paper Roll Picture:

The data of our Medical Heat Sealable Surgical Glove Coated Paper Roll

Material	60gsm medical grade paper+ 3gsm glue/6gsm glue/10gsm glue
Breathability	≥0.2um/Pa.s and ≤6.0um/Pa.s (GB/T2679.13)
Sealing strength	≥0.08KN/M (1.19N/15MM) EN868-7
Accommodation	blister packaging paper for medical device like Syringe Set, infusion set etc.,subsidiary device like gauze, adhesive tape
Sterilization Methods	ETO,Gamma,steam
Size	regular size: 415mmx1000m/410mmx1000m, any other size, can be made as requirement
Suitable film	PA/PE film 70micro-100micro
Product Type	1.Border sized paper coil, to adapt to the gamma or ethylene oxide sterilization 2.Full sized paper coil, to adapt to the gamma or ethylene oxide sterilizatio 3.PE film paper coil, adapt to the gamma or ethylene oxide sterilization 4.The borders sized paper coil, adapt to the high temperature steam sterilization
Printing technology	Flexo printing
Storage condition	Suggested that stored in the temperature lower than 25 humidity less than 60% of the clean area.
Certificate	ISO13485&CE&EN868

Packaging & Shipping

Medical Heat Sealable Surgical Glove Coated Paper Roll Packing:Shrink wrapping each roll

Shipping:

For the LCL(bulk cargo),we usually ship the goods to Shanghai port by truck,it only take 1 days from our factory to Shanghai port.And we will try our best to protect the goods during the transportation, because as you know that sometimes the shipping carton would be damaged or dirty .

For the FCL(full container),we will load the goods into container in our factory and then barge from our Anqing port to Shanghai.Then the carton wouldn't be damaged.

Delivery time for some main port as below: