Product Details

Product Overview

The ODH32 is a 24volt, 2, 4, 8,16 or 32 zone, Class B, Conventional Fire Alarm Control Panel with battery charger. It is designed exclusively to meet EN54-2&4 standard and the latest market requirements. It has functions of operation indication, fault indication, alarm indication and cable checking for short circuit or broken circuit. The powerful and highly cost-effective ODH32 can be used in low-sized applications.

Characteristics

1) Comply with EN54-2&4 standard

2) Class B Initiating Device Circuits (IDCs) accept two-wire smoke detectors and any normally-open contact devices

3) Key-switch/Password user control access

4) 8-line ×16-character large LCD display screen with multi-language menu options

5) Configurable detection zones (Latching/Non-latching/Enable/Disable)

6) Remote panel inputs (Class change/Evacuate/Silence alarms/System reset)

7) 4 alarm circuits as standard on 4 zone panel upwards

8) Configurable panel outputs (Fire routing/Fault routing/Fire protection)

9) Remote panel outputs (Evacuate/Buzzer active/Disablement active)

10) Programmable relay output

11) Delay mode configuration options

12) One man Zone/Sounder walk test

13) Up to 10 fully functional repeaters connected via 2 core RS485 data cable

14) Extensive configuration and programming options to cater for individual requirements

Specifications

AC mains power supply		AC220V±10% 50Hz, 2.0 amps
Battery		2×DC12V Sealed lead-acid batteries, maximum capacity:7Ah
System power supply output		DC28V 3.0 amps
Detection zone capacity		Up to 30 fire detectors and infinite manual call points
Alarm sounder circuit		400 mA Max. current drive per circuit - Fully monitored
Fire & Fault contact output		1.0 amps DC24V or AC125V
Using environment		Temperature: 0°C~50°C Related Humidity: ≤95% (40±2°C)
Dimensions		370×320×130mm (length×width×depth)
Weight		6.2KGS (without batteries) / 11KGS(with 7Ah batteries)