Specifications

Driving Type Cold Plastic Road Line Marking Machine
1. ISO&CE certified factory direct offer
2.HTS

Big Driving-type Cold Plastic(two component) Road Line Marking Paint Machine

Models: TT-CCP-IP, TT-CCP-IIP

Main Parameters:

Engine		37KW water-cooled, four-cylinder diesel engine
Air compressor		0.6m3/min
Paint tank capacity		325L×2
Glass beads bin		175L
Paint pump	Equipped quantity	Equipped with double high-pressure airless pumps
	Single pump pressure	20Mpa
	Single pump flow	20L/min
Spray gun		Double pneumatic spray guns, one manual spray gun., automatic gun rack
Control system		Digital intelligent control system
Applied paint		Cold-solvent paint ,water-based paint and two-component paint (optional)
Marking width		100-1000mm (Adjustable)
Dimensions (L*W*H), Weight		5300×2200×2300mm, 2800kg
Optional system		Guide warning screen, pre-marking system, trailer, swing type, screeding type, and two-component type.

Main Advantages:

1. Engine: 37HP water-cooled electrical starting diesel engine with four-cylinder in-line that is environmental protection
with low noise. The fuel tank cubage is 60L.
2. Driving system: Oil pressurized continuously variable speed transmission that can freely go ahead, back off and stop.
3. Driving speed: forward: 0-22km/h; back off: 0-12km/h; maximum climbing capacity: 15°.
4. Paint pump: Equipped with double hydraulic-driven plunger-type spraying pumps. Maximum flow per pump:
20L/min. maximum spraying pressure: 20Mpa.
5. Paint tank: Equipped with single two-room tank (cubage 500kg/room); equipped with hydraulic-driven erect vane
stirrer. The discharging hole is equipped with filter device that is easy to remove and clean.
6. Spray gun: Equipped with 4 new-type pneumatic spraying guns and 1 manual spraying gun with lengthening pipe with
reverse washed nozzle (42/20 or 70/20). The four guns can be started at the same time if construction needs. Spraying
width: 100-1000mm.
7. Available paint: Applying to spray cold solvent, water-based and two-component road marking paint.
8. Glass beads spraying system: Option for single or double spray guns if construction needs. Displacement of air
compressor: 0.6m3/min.
9. Glass beads bin: Single or double equipped with 200kg capacity bin with windows used to check the quantity of glass
beads in the bin timely (the double-equipped can spray beads uninterruptedly.)
10. Chassis: A firm welded, four-wheel structure with a 500mm inflatable pressure-proof wheel. The operators can
operate the machine sitting on the left or right and use the hydraulic steering (designed at the left or right according to
users’ needs) to freely control directions. The stable brake system makes the driving more secure.
11. Control system: TT-KZ300 PLC micro-electronic control system can freely change the line types such as single or
double continuous line and all kinds of broken lines. And the following functions can also be equipped according to the
users’ needs: paint volume measuring, line length and area measuring and line thickness reminding to make the marking
operation convenient and fast.
12. Gun bracket: Foldable bracket is equal distance to road surface. 13. Pre-marking system: Pre-marking working synchronous with the marking operation, greatly improving the
construction efficiency.

Relating Machines Produced by Our factory

1.Medium Driving-type Cold Plastic(two component) Road Line Marking Paint Machin

2.Small Driving-type Cold Plastic(two component) Road Line Marking Paint Machine