Characteristics:
aerosol carb cleaner spray can remove instantly the carbon residue,soot and dirt on carburetor, provide lubrication and improve engine efficiency. It can prolong the life of engine.

Application:

aerosol carb cleaner spray

1. Take the air filter off the carburetor, Start the engine and spray aroud the carburetor when engine runs slowly.

2. Speed the engine up again after a halt for a few minutes, and discharge the sediment out.

3. You can also disassemble the carburetor and clean it with the cleaner directly.

Direction:

1.Operate the engine for 5-10 minutes.

2.Remove the air cleaner. For the engine at fast idle(5,000-6,000rpm),spray the carb cleaner into the air horn, flooding choke, throttle shafts

and plates.

3.Gums, Varnishes and Carbon Deposits will be burnt away through exhaust gases.

4.Turn off the engine and instal the air cleaner again.

5.For the FUEL INJECTION systems, spray 1 can of this Carb Cleaner directly into  tank of fuel.

Caution:

 1. aerosol carb cleaner spray is extremely flammable. Do not spray near sparks, heat or open flame. Do not store in direct sunlight.

 2.Keep area ventilated during use.

 3. Keep out of reach of children.

 4.Do not puncture, incinerate, burn or store above 50°C

Warehousing:

Container loading: From Port Huangpu, Guangzhou, China.