tire puncture sealant
USD $0.6 - $0.9 /Piece
Min.Order:6000 Pieces
Dongguan Dongzhimei Auto Accessories Co., Ltd.
tire puncture sealant
Characteristics:
1. tire puncture sealant is designed to quickly seek out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach holes within 6 mm diameter on tubeless rubber tyres of cars, motorcycles and electrical bicycles. No jack nor tyre-undo is needed. One step procedure of tyre bumping and repairing is finished
in seconds. It can also be filled into new tyres to prevent unexpected leakage.
2. Non-toxic and odorless. No corrosion and no damage to the tire.
3. Tire repair spray and tire inflator tire sealant 450 ml/550ml/650ml also has the function as a small fire extinguisher. It can effectively cool the hot tyre when running in high speed.
Application:
tire sealant,tire inflator
Direction:
1.If possible remove object causing puncture.
2.Shake the can well before use.
3.Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4.After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Caution:
1)For external use only.
2)Keep out of the reach of children.
3)Avoid contact with eyes, if it accidently enters eyes, immediately rinse with clean water.
4)Avoid sunlight and damping, keep in cool and dry place
5)Do not puncture, heat or incinerate can, even when it’s empty
DESCRIPTION | tire puncture sealant |
CAN Material | Tin Can |
Volume | 450 ml/550ml/650ml |
GROSS WEIGHT | 360g |
PCS/CTN | 12pcs |
Carton Size | 27X21X24.5CM |
G.W./CTN | 7kg |
CBM/CTN | 0.0108 |
Warehousing:
Container loading: From Port Huangpu, Guangzhou, China.