1. Protect Chassis metal from water and rust.
2. Seal junction or crack and tighten screws firmly
3. Deaden noise transmission and make driving comfortable.
4. Prevent striking by sand and stone during driving and prolong car’s life.
1. Clean the base area thoroughly, which should be clean dry and free of dust, oil, grease and wax, etc.
2. Cover the other parts tightly
3. Spend two minutes to shake the can evenly, open the lid, remover the seal and insert the special designed spray gun onto the mouth, collect the 0.6-0.8MPa comprssed air, finally spray onto the surface at a distance of 25cm.
4. To avoid the flow line or sagging, three times spraying are needed. After the first time spray, flatten and fill the cracks and caves with metal seal-glue. Every interval should be not less than 15 minutes, best noise deaden effect need more than 1.5mm thickness.
5. Before drying, petrol is allowed to clean.
1. Inflammable, spray in a ventilated area, keep far from heat and fire.
2. Work under personal protection with glasses, mast and gloves. If uncomfortable when touch the product, please go to a doctor.
3. Better have a trial spray if you use the product first to confirm the best orperating methods.