Specifications

Vial Filling Machine
Vial Filler
Vial Capper
Vial Filling and Capping Machine
Vial Filling & Rubber Stoppering Machine India

Vial Filling Machine

 

 

 Vial Filling Machine is suitable for the liquid filling and rubber stoppering injectable vials. Machine complete in pleasing matt finished stainless steel. The basic unit consists of turntable, S.S. Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built S.S. 316 Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.

The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots.


Process Operation:-

The incoming dry vial (sterilized and siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of S.S. 316 construction and both, glass as well as S.S. syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided

 

Technical Specification:-

 

Model	ALVF-60	ALVF-120
No of Filling Head	Two	Four
Production Rate	30 to 60 Vials/Minute	60 to 120 Vials/Minute
Input Specification:	-	-
Container Diameter:	15mm to 70mm	15mm to 70mm
Container Height:	25mm to 140mm	25mm to 140mm
Rubber Stopper:	13mm, 20mm & 28mm Butyl with the help of change part	13mm, 20mm & 28mm Butyl with the help of change part
Filling Range	2ml to 250ml	2ml to 250ml
Filling Accuracy	±0.5-1%	±0.5-1%
Power Supply	1 H.P.	1 H.P.
Electrical Characteristics	380-440 Volts, 3 Phase, 50 Hertz, 4 Wire System	380-440 Volts, 3 Phase, 50 Hertz, 4 Wire System
Optional Accessories	Programmable Logic Control (System) with MMI	Programmable Logic Control (System) with MMI
-	Safety Cabinet covering full machine	Safety Cabinet covering full machine
Overall Dimension	1900mm(L) x 800mm(W) x 1680mm (H)	2000mm(L) x 850mm (W) x 1680mm (H)

 

Note: Electrical characteristics can be adjusted as per customer’s requirements.

* Rights of technical improvement & modification reserved.

* Illustration & dimensions are shown for information purpose only.