Specifications

Double Auger Dry Syrup Filling Machine, Pharmaceutical Powder Filling Machine, Servo PLC based Auger Powder Filling Machine Indi

Double Auger Powder Filling Machine is uses for the filling and capping of dry syrup bottles in pharmaceutical industry. We are having different machine models suitable as per different customer requirements.

 

Salient Features     Compact GMP model.   “No Bottle– No Filling” system.     ± 1% filling accuracy.     All motors are provided with appropriate contractors and relays for the protection against any overload or jamming.   Safety clutch system to avoid Bottle breakage.   Variable A.C. Frequency Drive for speed control.   All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.   S.S. square pipe frame structure to avoid vibration.   All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.   Imported Gear Motor for Main drive, in feed and out feed table.   Process Operation     The sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one.

Technical Specification

Model APF-40 APF-80 Production Rate 15 to 35 Fills/Minute 30 to 80 Fills/Minute Input Specification - - Container Diameter 25mm to 100mm 25mm to 100mm Fill Capacity 5 gram to 1000 grams 5 gram to 1000 grams Filling Accuracy ± 2% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity ± 2% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity Power Specification 2 H.P. 2 H.P. Electrical Characteristics 440 Volts, 3 Phase, 50 Hertz 440 Volts, 3 Phase, 50 Hertz Relational Humidity: Below 28% Below 28% Optional Accessories Pure Air Filter, Vacuum Pump Pure Air Filter, Vacuum Pump - Oil Free Air Compressor Oil Free Air Compressor - Online Pre-Media Filling Arrangement Online Pre-Media Filling Arrangement - Programmable Logic Control (System) with MMI Programmable Logic Control (System) with MMI - Aluminum Profile Cabinet covering full machine Aluminum Profile Cabinet covering full machine Overall Dimension: 1500mm (L) X 800mm (W) X 1500mm (H) 1800mm (L) X 800mm (W) X 1500mm (H)