Specifications

100W LED switch Power supply
Input voltage: 170-250VAC
Output voltage: 5V, 12V ,24V
2 years Warranty
CE & RoHS

 100W LED switch Power supply

 

Input voltage: 170-250VAC
Output voltage: 5V, 12V ,24V
Output current: 20A, 8.5A, 4.5A
Output power:  100W

 

Features   1,Non-waterprooof design for indoor use only
                  2,Protections: Short circuit / Overload/Over temperature
                  3,Products through CE, RoHS Certification

 

Specification:

 

Model	S-100-5	S-100-12	S-100-24
DC output voltage	5V	12V	24V
Output voltage error(Note2)	±2%	±1%	±1%
Rated output current	20A	8.5	4.5A
Output current rage	0-20A	0-8.5	0-4.5A
Wave and noise(Note 3)	100mVp-p	125mVp-p	150mVp-p
Inlet stability(Note 4)	±0.5%	±0.5%	±0.5%
Load stablity (Note 5)	±1%	±0.5%	±0.5%
DC output power	100W	102W	108W
Efficiency	76%	80%	83%
Adjustable range for DC voltage	10%	10%	10%
AC input voltage range	85-132VAC /176~264VAC selected by swich 47~63Hz;248~370VDC
Input current	2A/115V 1A/230A
AC INnrush current	Cold-start current30A/115V 60A/230V
Leakage current	<1mA/240VAC
Overload proctection	105%-150%Type:Foldback:current limiting reset:auto recovery
Over-voltage protection	115%-135
High-temperature protection	Yes
Temperature coefficient	±0.03%/°C(0-50°C)
Setup rise hold up time	1s,30ms,15ms
Vibration	10-500Hz,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage	Input and output internal: 1.5KVAC,Input and enclosure : 1.5KVAC,Output and enclosure: 0.5KVAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure: 500VDC/100MΩ
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity	-20°C~+85°C.10%~95%RH
Overall dimension	199×98×38mm
Weight	0.65Kgs
Safety standards	UL1012 TUV EN6050(IEC950,UL1950)Approved
EMC standards	CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification
Note
1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.Humidity.
2.Error.include the setting error,line stability and load stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%.