Specifications

1.LED DMX Decoder RGBW
2.Grey Scale:256 levels
3.Input voltage: DC9V-24V
4.Signal input :DMX512/1990
5.Output Power: 48W

 

 

LED DMX Decoder RGBW led driver DC9V-24V

 

Introduction:

       YM-HD4P is a Constant current DMX512 Decoder and driver for RGBW high power led lights. By advantage of advanced coding technology, the unit is compatible with international DMX512/1990 standards, which decodes the international popular digital control signals into a PWM signal to drive RGBW LED lights. Each channel can be controlled with 256 level gray-scales.

 

Features:

1. Perfectly compatible with international DMX512/1990 standards.
2. Differential signal transmission, support 3 mode of data transmission:

3. Display effects:
If connected to DMX512 led controller or DMX512 console, the effects will follow the DMX512 led controller or DMX512 console, and change color per their commands.
If not connected to DMX512 led  controller or DMX512 console, the effects will for pre-load program in side of the decoder.
4. Connection in Parallel
Each decoder is connected on DMX512 signal bus in parallel. It is recommended that signal amplifiers should be used for every 32 pcs of decoders in case of signal drop(Attenuation).
5.Strong anti-interference ability, anti-static and prevent lightening design.

 

Specification of YM-HD4P DMX Decoder

 

Product name	LED DMX Decoder RGBW
Model no.	YM-HD4P
Input voltage	DC9V-24V
Output Current	350 mA/channel
Output Power	48W max
Grey Scale	256 levels
Signal input	DMX512/1990
Signal Output	constant current PWM*4 Channels
Consumption	<1W
PCB Size	54*29mm

 

Application:

Apply for LED RGB Light:  LED project light, LED Wall washer, LED ground light, LED Ceiling light, Channel light, LED Guardrail tube, full color RGB lights and LED point source lights.

 

Detail

 

Input & Output:

 

 

POUT PIN: PIN is program input, POUT is program output.
 D+, D-, GND:  input signal of DMX512,
 Power+ and Power-:  Power supply, Power+ is positive and Power-(GND) is ground( negative).
 V+, R, G, B,W:  RGBW Output, V+ is common anode of output.

 

 

Conjunction:

 

1 Pin: V+
2 Pin: R  Red LED drive output
           3 Pin: G  Green LED drive output
4 Pin: B  Blue LED drive output
5 Pin: W  White LED drive output

 

 

 

Our Factory

 

G&G Technology Co., Ltd. is a leading led lighting solution provider in China, own its GG and YM brands, design and manufactures a wide range of Lighting products,LED light, LED display, LED stip,LED control system, LED module, LED point source pixel,LED drivers, Power supply, and can design and delelop lighting solution per customer's requirement. Our spacious factory is equipped with the latest manufacturing equipment and first-class research and development technology, enabling us to provide high-quality products  

 

 

 

Good after-sales service:

 

After you buy this product, we will provide you with attentive after-sales service. Our engineers will carefully guide the installation and usage for you. That will includes connection of the controller and the light, and also the control software.

 

 

1.Payment methods:T/T,Western Union, place the order on alibaba directly, etc

   100% payment if the total amount less than 5000USD

   30% deposit and 70% balance before shipment if the total amount is more than 5000USD

2.Lead time:5-7 working days,subject to the order quantity

3.Delivery ways:DHL,EMS,UPS,FedEx (door to door service),by sea, air and etc

4.Sample is available, Don't limit the quantity

 

Any question, welcome here.