Product Details

Multifunctional Ultrasonic Hot-fix Setting Machine

The product is a portable welder , which integrates with safety, craft of advance, high efficiency ,convenience etc,which has a big advantage in structure and craftwork, especially in the aspect of safety. We combine the advantages of domestic and overseas technics with the actual situation of our own , making efforts to ensure the using safety of the products.

Working Frequency	28KHz
Ultrasonic Time	0.1s-1.2s
Working Voltage	220V.50Hz
Output Efficiency	150W
Sizes	393121
Weight	8kg
Welding Standard	2-8mm

General Operating Notice

1. Work area should be clean. Mess-up will cause the accident .
2. Make sure about the suitable working environment , it should be displayed in cool and dry places , keep away from explosive and flammable goods.
3. Caution about electronic shock , avoid the machine to contacts with radiator , refrigerators etc.
4. Make kids and non-staff keep away from the work area .
5. If not used , please display the ultrasonic welder on the dry places and make sure that kids aren’t able to touch it , lock it simultaneously , do not display it the ground directly.
6. The wire should keep away from the hot resource and oil.
7. Tools (power wire and energy converter and so on) should be maintained well and cleanly . so that they can exert their effect fully . For example ,if any troubles are detected , users should contact service to repair it.Handle (energy converter should keep dry ; prevent grease and water.)
8. Changing the connecting measure of output wire is forbidden, if any troubles are detected , please contact service to repair it.
9. If not used , unplug the socket.
10. In order to avoid the accident , do not use the ultrasonic welder to do extra task out of the rules.
11. Do not use the solvent such as gas and alcohol to clean the machine and accessories . If needed , please use soft cloth dipping some water .
12. Pay more attention to control the device fully.

Operation

1. Turn on the power . And pilot lamp will be on.
2. Check the ultrasonic , press the testing switch , you will feel oscillating and warm touching the welding head . If it cries or no oscillations , no temperature , please check below : (1) did it connect between welding head and the converter . (2)The welding head was broken.(3)The converter broken.
3. Time of setting ultrasonic : it can be adjusted according to the situation of the diamond and bead . Usually it should be set at 0.1-0.5s. the converter should be vertical on the stones , then press the switch and it work automaticlly,moving the converter away.
4. When the machine is used for a long time , Please clean the pump when the welding head can’t suck well.
5. After a long time to use , the welding head may be abrasive on the surface , please change the head when necessary ( make sure it was turn off when changing ). If the machine out of the way, please send it to us.
6. It is used very broadly in the filed of solder diamond and bead in shoes manufacturing, clothes manufacturing etc.

Trouble Shooting

Trouble

Reason

Solve

Not power

1.The power wires broken

2.Fuse working

3.The switch broken

1.Fixed and change

2.Change

3.Change

No sucking or not enough

air when sucking

1.The pump can not work

2.The welding head blocked

3.The air tubing broken

1.Repair and change

2.Dredging the tubing

3.Change the tubing

Can’t weld well or no enough energy when welding

1.The welding head broken

2.Not connecting well

3.Out put port broken

4.The out put wire broken

1.Repair and change

2.Screw.it

3.Connecting it

4.Change the wire

Mucus on the welding head

The surface of the welding head

is abrasive

Contact serivce to fix it

Other names: Multifunctional rhinestone applicator, multifunctional ultrasonic rhinestone machine, ultrasonic rhinestone setter, ultrasonich rhinestone transfer machine,ultrasonic rhinestone setting machine.