Specifications

use top quality material to make the rotary kiln.
rotary kiln/ Cement rotary kiln / medical waste rotary kiln manufacturers

       Rotary Kilns are commonly used for heat processing of minerals and aggregates such as lime, cement, and iron ore. To achieve consistent quality results, it is important to maintain a uniform product temperature at the kiln entry, mid zone, and discharge. In most rotary kilns, the challenge with temperature process control is that the temperature sensor must view through flames or heavy smoke and dust. Consequently, when selecting a sensor, the design, wavelength, and alignment are all important considerations. 

    Our high-performance dual-wavelength sensors offer unequalled performance for accurate and repeatable measurements on kiln applications. These sensors can operate properly when the target energy signal is diluted over 99% by such things as dust and smoke. To effectively measure targets through flames, the 1400 and 4400 Series are recommended. These single-wavelength sensors utilize a very narrow band 3.8 micron filter that provides unequalled performance with measurements through flames.
    Common process measurements include:
    Hot Clinker Detection
    Product Discharge Temperature
    Product Entry Temperature
    Mid-Zone Temperature
    Combustion Gas Temperature
    Kiln Shell Hot Spot Detection

Supplying scope:

 1. shell of rotary kiln

 2.tire on the shell

3. Gearwheal.

4. Pinion

5. Motor

6. Reducer

7. Control panel

rotary kiln/ Cement rotary kiln / medical waste rotary kiln manufacturers

	s			Reducer		Electrical motor			Type of thrust roller	Support Qty	otal weight (excluding refractory brick)t
	Main driving (r/min)	Slope of the kiln shell%	Capacity(t/d)	model	Total ratio	Model	powerkw	Speed regulation ranger/min
Φ1.9/1.6x36	0.53-1.59	4	2.5-3	JZQ750-1	48.58	JZT-72-4	30	1200/400		3	53
Φ2.1/1.8x36	0.5-1.51	4	4	UT2-110	163.36	JZS-81	30/10	1410/470	..	3	75
Φ1.2x25	0.5-1.6	3		PM650	40.17	JZTY71-4	22	1200/120	..	3	34
Φ1.6x32	0.158-0.258	3		PM750	48.57	JZJY61-4	15	1200/120	..	3	46.82
Φ1.8x45	0.66-1.98	4	3.5	UT2-110	163.36	JZS-81	30/10	1410/470	..	3	80
Φ2.2x50	0.125-1.25	3.5	4	ZS145-11	157	YCT280-4A	30	1320/132	..	3	130.71
Φ2.5x50	0.516-1.549	3.5	5.5	ZS165-7	99.96	YCT355-4A	55	1320/440	..	3	167.5
Φ3x48	0.3309-3.309	3.5	35	ZL130-14	32.11	ZSN4-250-21B	90	1000/100	..	3	237
Φ3.3x52	0.391-3.91	3.5	50	ZSY500-28	27.707	ZSN4-315-082	190	1000/100	..	3	280.8
Φ4x60	0.396-3.96	3.5	104	ZSY630-35.5	34.601	ZSN4-355-092	315	1000/100		3	487.5