Specifications

peanut sheller machine :
1.easy operation;
2.energy saved;
3.good seperation;
4.small taken area.

                             top quality peanut sheller machine ( high output)

structure:

Peanut Sheller is composed by racks, fans, rotors, single-phase motor, screen (the size of two kinds), into the hopper, vibration sieve, V-belt wheel drive V-belt and other components. Normal operation of the equipment, peanut quantitative, uniform, continuous input into the hopper, the repeated attacks of peanuts in the rotor, Mount Sassafras, the collision of broken peanut and broken peanut shells in the rotation of the rotor pressure and combat a certain aperture sieve (peanut first threshing macroporous mesh skin fruit in the clear after the election to replace the second peel) filter into a small hole mesh separation. Peanut shells, grain in the role of the rotating fan blowing, the light weight of the peanut shells blowing outside the body, heavier weight peanut particles by vibrating sieve filter to achieve clear election purpose.

 

Proper use of the Sheller
(1)request of Sheller.

To clean, peel, high productivity, the cleaning device Sheller, also requires a higher degree of cleanliness; loss rate, crushing rate; structure should be simple to use and reliable, easy to adjust, less power consumption, a certain degree of versatility. Make the peel, for a variety of crops to improve the utilization of the equipment.
(2) request of peanuts (skin effect).

The peanuts should be suitable for dry and wet, too dry, broken high; too wet affect efficiency. Wet and dry suitable can be used the following methods:

one .winter peel. Use about 10 kg of warm water before the peel evenly sprayed in the 50 thousand the Kepi fruit on about 10 hours (other seasons covered with plastic film for 6 hours, and covered with plastic film), and then in the sun for about 1 hour peel. 

two. will be more dry peanuts (skin effect) dip in the large pool, immediately remove and dip with plastic film covering about one day, and then drying in the sun, until the wet and dry suitable began to peel.

The use of methods and precautions:

(1) prior to use, should first check all fasteners are tightened, the rotating part of the flexible, each bearing lubricant. The peel should be placed in a stable on the ground.

(2)Motor starting, the rotor should be turned to the direction indicated on the equipment. To idle a few minutes to observe whether the abnormal sound in normal operation only after the feeding peanuts evenly.

(3) peanut fruit feeding should be uniform, regular, not containing iron, stones and other debris to prevent broken peanuts and cause mechanical failure. M port switch When peanuts coverage the full sieve surface before they open.

(4)Appropriate choice according to the peanut size sieve.

 

 

(5) increase in peanut shells peanuts, you can move down the motor, so that tension fan belt, increasing the hair amount.

(6 )operation, people not standing on the side of the belt drive, in order to avoid injuries.

 

(7) for some time, preparing to store the machine, its appearance of dust, dirt, and the internal remnants of grain debris should be cleaned to remove the belt prior custody. Diesel bearing cleaning the various parts of clean, dry butter. Machine you want to overwrite in dry warehouse, avoiding the sun and rain.

(8)Should ensure adequate lubricants and transmission parts and bearings to be regular cleaning and replacement.