Specifications

1.different shape with different molding tube
2.2-3t/hour
3.stable character
4.warrant time:one year
5.send technician

 charcoal bar shaping machine

Introduction:

 

 

1.This coal extrusion machine uses the principle of spiral extrusion, compressed the prepared pulverized coal into a certain intensity of cylinder or plum-flower shaped through extruding.    

 

2. Coal briquette extruder is the main equipment in the system of molding fuel,it squeeze powdered coal into a certain hardness coal briquette sticks (various shapes according to customer's requirements),in place of block coal,it can make full use of coal dust to reduce fuel cost.

 

 

 

Raw material:

 

 

 

charcoal, coal, mineral powder and so on.

 

 

 

 

 

Working principle:

 

This charcoa bar stick making machine is an ideal equipment to make charcoal or coal powder into stick or briquette.

 

Use the working principle of high pressure, this machine can squeeze powdering coal/charcoal into a certain high density shape: hexagon, pentagon, triangle, square, etc, according to the requirement of the client.

 

 

Charcoal making process:

1.Crush the raw material into powder, the more higher the fineness rate is the more smooth the final product is.

2.Use a mix machine to blend the raw material with binder

3.Put the prepared raw material into the charcoal stick making machine,  then you will get your dreaming product.

 

Advantages:

• Simple structure: the machine is composed of the machine body, the molding tube, screw propeller
• High concentricity, resist reverse thrust and reliable working condition
• The sealing part adopts fautage design, the dirts can leak out through the faultage

Final product:

Charcoal/coal specifications: 

 

1) Moisture : ≤12%

 

2) Ash content: ≤7%

 

3) Fixed carbon: ≥75%

 

4) Heating capacity(mj/kg): ≥26

 

5) Density(g/cm3): ≥1.1 

 

6) Self-ignite time: about 3hours/100kg, longth than machine-made charcaol about 1/4

 

7) Appearance (Common specification) : Cross-sectional hexagon (outside diameter ≤4.5cm), a hold in the middle, about 10cm in lengh, about 100 grams in weight per piece. 

Special specifications can be done according to customer's requirement. 

 

 

Technic data:

model type:MBJ-180

power:22kw

capacity:2-3t/h

final size: Dia.20-60mm

 

  

About the molding tube and final products:

 

 

About us: